Weight Distribution System Recommendation for a 2016 Ram 1500 with Factory Air Suspension
Question:
I plan on towing a Fallstaff V-lite travel trailer wt 8000 lb, tongue wt 880lb with a 2016 RAM 1500 Rebel with factory air suspension. Is there anything different that needs to be taken into account when setting up a weight distributing hitch with air suspensions? Does the adjustable ride height / load leveling natue of the air suspension affect how truck height measurements should be taken during hitch set up? Also looking at either an Equalizer or Reese dual cam hitch....recommendation between the two?
asked by: David
Expert Reply:
When setting up a weight distribution system on a vehicle with auto-leveling rear suspension what you will need to do is first connect the trailer to the truck and allow the auto-leveling suspension to do it's thing. Once it has stopped moving the rear suspension you can then begin to set the weight distribution system up.
Tongue weight also includes the weight of any cargo behind the rear axle of the vehicle as well, but for a tongue weight of 880 lbs like you mentioned the Reese Strait Line system part # RP66084 that you referenced would be my recommendation. This system has a tongue weight range of 600-1,200 lbs and features the only sway control on the market designed to fight sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Comparing the Equal-i-zer Hitch Vs The Reese Wieght Distribution Hitch With Dual Cam Sway Control
- Q&A: Can Strait Line Weight Distribution be Used with Feather Lite Trailer