Internal Dimensions of Curt Threaded Quick Link C82932

Question

Question:

What are the inside dimensions for the Quick Link? In both the short and long direction?

asked by: Brian

0

Expert Reply:

I went out into our warehouse to grab a part # C82932 to measure and found the internal dimensions to be 3-5/16 inches in length and 7/8 inches wide.

There are more dimensions in the attached videos.

expert reply by: Jameson C

0

click to enlarge

Answer 1

When using safety chains, each component, including the quick links, must meet or exceed the GVWR of your trailer. So if you used a pair of safety chains that were rated for 12,000 lbs - to meet the 24,000 lb GVWR of your trailer - you would need to…

view full answer...

Answer 2

Provided that you have safety chains rated as high or higher than the hitch capacity and they are securely connected to the safety chain loops on the trailer hitch, how you route them is not really an issue. You just do not want them to bind up (get…

view full answer...

Answer 3

I may have a solution for you, but I checked with my contact over at Roadmaster and there are unfortunately not different sized clevis hooks on their safety cables like the #RM-655. However, you may be able to use some quick links like the Quick…

view full answer...

Answer 4

The B&W Tow & Stow 3-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise #BWTS30048B will fit your 2020 Ford F-250 Super Duty as long as you have a 3" hitch. This also has a maximum drop of 4-1/2" and requires 11" from…

view full answer...

Answer 5

The #BWTS30049B Tow & Stow ball mount is designed for 3 inch hitches, like what your 2020 F350 is equipped with. The upright or vertical portion of the B&W #BWTS30049B Tow & Stow adjustable ball mount is about 11 inches in total. If you…

view full answer...

Answer 6

The only way to avoid using a reducer sleeve like the Curt #C45408 is to get a ball mount with a 3" shank and for that I recommend checking out the B&W Tow & Stow 3-Ball Mount #BWTS30049B which comes with the 3 common hitch ball sizes…

view full answer...

Answer 7

For the 3 inch hitch of your 2021 Ford F-350 to determine if you need the 4-1/2 inch drop Tow and Stow part #BWTS30048B or the 7-1/2 inch drop part #BWTS30049B will be based largely on the trailers you plan to tow and how tall the coupler sits from…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Internal Dimensions of Curt Threaded Quick Link C82932

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching