7-Way and Brake Controller Recommendation for a 2013 Ford F-150 with 4-Way

Question:

I have a 2013 F-150 xl that has a factory 4 pin flat trailer connector and I would like to change it to 7 pin RV style. Is the brake activation wire not there or is it inside the harness? thanks

asked by: Mike

Expert Reply:

To convert the 4-way of your 2013 Ford F-150 to a 7-way you will need the part # 37185 as a way to convert it to a 7-way. If you check out the video I attached you can see how to tie the 7-way into the wiring of your truck without having to run the wires all the way up to the front of the truck.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

Then for an install harness to easily install the controller you would need the part # 22292. I attached an install video for this as well.

expert reply by: Jameson C