Recommendation for Malfunctioning Landing Gear Leg on a 2007 Keystone Montana 38 Foot 5th Wheel
Question:
We recently purchased a 2007 38 ft Montana 5th wheel. When we try to use the landing gear, it is blowing the 40 amp fuses. It is very hard to crank up and down. Gear box model # 1-065-041012-01, looks ok. The motor, model # 1A-065012-02-01, it seems to work ok when there is no load on it. Unable to find a # on the landing gear, it measures 2 1/2 x 2 1/2 x 29 1/2. Could you please advise and suggest a solution. Thank you.
asked by: Ollie D
Expert Reply:
I can help you with your landing gear issue.
What could be happening is that the main screw and nut are bent or stripped inside the landing gear leg. It could also be the gears at the top of the leg are bad.
I spoke with Lippert and according to them they have a custom set of replacement legs made specifically for the Keystone Montana RV Line. Unfortunately there are no replacement parts like the bolt and nut that for this leg. I would recommend replacing the landing gear. I would start with replacing the lead leg, since the other components seem to but functioning okay. Once installed you will be able to identify if the follow leg will need replacement or is still in working condition.
The specific OEM replacement legs for the Keystone Montana's are Follow Leg # LC178652 and the Lead Leg # LC178653. Because of their unique designs they will be the only ones that fit the Montana. The replacement motor for the Keystone Montana is # LG-142178.
I have linked all the parts mentioned above for your convenience.
Products Referenced in This Question
Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
more information >
Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Motor
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
more information >
Continue Researching
- Shop: Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs
- Q&A: Faster Motor Replacement for Venture M9000PK Landing Gear
- Shop: Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor
- Q&A: Replacement Landing Gear for 2005 Montana 5th Wheel Trailer
- Q&A: How Do Tabs on Lippert LC178653 Landing Gear Leg Fit in Clips Welded onto 5th Wheel Frame
- Q&A: 2010 Keystone Montana 5th Wheel Replacement Landing Gear Components
- Q&A: Does Mounting Hardware Come with Replacement Landing Gear Gear Box RVLG-RDBOX
- Q&A: Troubleshooting Lippert Power Jack Not Extending or Retracting But Motor Is Working
- Q&A: Is there a Way to Identify 5th Wheel Trailer Landing Gear with No Markings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Flat Towing Package for 2016-2017 Chevrolet Equinox and GMC Terrain
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: Trailer Wiring Diagrams
- Article: Which RV Propane Tank Size Do I Need?