What Size Hook Will Fit Curt Safety Chain Loops # C60691

Question

Question:

What size chain hook fits these? Will a 3/8 clevis hook fit?

asked by: Kirk

1

Helpful Expert Reply:

I spoke to my contact at Curt an he said a 1/2 inch diameter clevis hook would be perfect for use with the Curt Safety Chain Loops # C60691, so a 3/8" diameter clevis hook will fit just fine.

If you don't already have them, I recommend the Curt Clevis Hook with Spring Loaded Safety Latch # C81980. It's 1/2"diameter, features an 1-1/4" opening and has a capacity of 48,000 lbs.

expert reply by: Jameson C

1

Answer 1

The Curt Breakaway Battery Charger part #C52025 only charges the breakaway battery while the trailer is plugged into the vehicle and the vehicle's battery charge line circuit is active (it could be constant on or keyed with the ignition). Once…

view full answer...

Answer 2

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 3

I reached out to my contact at Pewag, and the Pewag Grab Hook for Glacier Transport Chain, #G7CG-38-YC, will work with the 5/16 inch chain. I've included a picture of the 3/8 inch hooks on a 5/16 inch chain.

view full answer...

Answer 4

Zinc plated screws are going to be the best option for use with aluminum to resist galvanic corrosion. This corrosion you are referring to is from two dissimilar metals reacting so you want to use the most similar metals when installing your E-track…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…

view full answer...

Answer 8

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...

Answer 9

Yes, the Curt Safety Chain Loops for Ford Factory Rail Kit part #C60691 that you referenced are a confirmed fit for the factory rail kit in the bed of your 2019 Ford F-350. I attached a review video for this kit for you to check out as well.

view full answer...

Answer 10

Thank you for the picture! I reached out to my contact at Lippert and based on the serial number you provided I was able to confirm that your trailer has a 1621 pin box with an 18000lb rating. For a gooseneck pin box that will fit you will need…

view full answer...

Answer 11

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR weighs a hefty 120 lbs. This is the only way to add a gooseneck pin box to a 5th wheel trailer with a Rhino Box. You will also need the Safety Chain with 2 Hooks item #GY49GR. State laws…

view full answer...

Answer 12

Lippert 1621 5th Wheel Pin Box - 15,500 lbs Item #LC1191191 weighs approximately 100 pounds including the wings the pin box bolts to. Lippert 1621 5th Wheel Pin Box - 21,000 lbs Item #LC1387882 weighs approximately 115 pounds including the wings the…

view full answer...

What Size Hook Will Fit Curt Safety Chain Loops # C60691

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching