Would the Lionshead Dually Trailer Wheel part # LHHA420 Fit a Dexter 9k Axle

Question

Question:

Will the Lionshead 16inch dual rim with the 4.77 pilot hole work on a dexter 9k hub? The trailer came with a 16.5 rim that has a 5.5 offset and the Lionshead has a 5.5 offset so it looks like it would.

asked by: PHIL S

0

Expert Reply:

As long as the Dexter 9k hub has the same 8 on 6-1/2 inch bolt pattern as the # LHHA420 it would fit and work fine. The offset of this rim is close enough that there wouldn't be any interference.

expert reply by: Jameson C

0

Answer 1

When turning your Atwood/Dometic G6A-8E water heater from propane to electric you will need The Hott Rod RV Water Heater Conversion Kit #DGR6VP. This conversion kit converts your RV's propane water heater to electric operation, while keeping your…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 6

The Lionshead Steel Dual Wheel, 4.75" Pilot - Silver, Item #LHHA420 is a 16" x 6" wheel with an 8 on 6-1/2 bolt pattern, so as long as your Class C motorhome wheels have the same bolt pattern and are the same 16" x 6"…

view full answer...

Answer 7

A hub-centric wheel centers upon the portion of the hub that protrudes through the pilot hole in the wheel, instead of on the lug nuts like a lug-centric wheel would. A wheel with a 4.77 inch pilot diameter would fit perfectly on your hub. The 2…

view full answer...

Answer 8

Pilot diameter on a wheel like our dually trailer wheel part #AM20783 that you referenced is basically the diameter of the center hole of the wheel. This wheel has a pilot diameter of 4.75 inches. I attached a picture that shows this dimension as…

view full answer...

Answer 9

It is possible that the Vesper Steel Dual Trailer Wheel - 16" x 6" item #MX89FR will work on your 2022 Jayco Entegra Odyssey 31F since it is on the E450 Ford chassis. It is however a trailer wheel. You will need to confirm the bolt pattern…

view full answer...

Answer 10

There are two possible options for you. The Dexstar Dual Wheel #AM20790 which is the 16" x 6" size you need with the 8 on 6-1/2" bolt pattern, uses flange nuts instead of standard lug nuts, and would work with the 225/75R16 tire you…

view full answer...

Answer 11

We were not familiar with the term "coin in coin out" but are guessing that you mean the wheel can be used as an outer or inner wheel. If so we have the Dexstar #AM20783 16" Dual Wheel. Steen wheel with 8 on 6.5 bolt pattern and…

view full answer...

Answer 12

Thanks for the picture! The Lionshead Steel Dual Trailer Wheel, item #LHHA420, is 16" by 6" and has the same 8 on 6-1/2 lug pattern. Your LT25/75R16 tires fit wheels that have a width of 6" - 7", so this wheel will work great. To…

view full answer...

Would the Lionshead Dually Trailer Wheel part # LHHA420 Fit a Dexter 9k Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching