Will Draw-Tite Trailer Hitch, # 75579, Fit A 2008 Chrysler Town And Country With Stow-N-Go Seating
Question:
We have a 2008 Town and Country - Stow and Go. The dealer told us it took a special $800 trailer hitch. This product stated all models does that include ones with the Stow and Go configuration? Thank you
asked by: J D
Expert Reply:
The Draw-Tite Trailer Hitch, # 75579, will fit the 2008 Chrysler Town and Country with the Stow-N-Go seating. It is a Class III hitch with a Tongue Weight of 400 lbs. and a Gross Towing Weight of 4,000 lbs.
If you will be towing, you will need the Draw-Tite Ball Mount, # 2753, and the Pin and Clip, # PC3. You will also need a hitch ball. Depending on the coupler size on the trailer you will be towing you will need either a Tow Ready 1-7/8 inch Hitch Ball, # 19260, or a Tow Ready 2 inch Hitch Ball, # 19247.
If you do not have a factory 4-Way trailer connector on your Chrysler Town and Country, then the wiring harness you will need is the Tow Ready Vehicle Wiring Harness, # 118552.
I am sending links to the installation instructions for the hitch and the wiring harness. Also, a video link to the hitch being installed on a 2008 Chrysler Town and Country.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Trailer Hitch Fits a 2019 Dodge Grand Caravan with Stow-N-Go Seats
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Hitch and Towing Capacity for 2018 Dodge Grand Caravan
- Q&A: Rise or Drop of Ball Mount Needed for 2016 Dodge Grand Caravan
- Q&A: Is There a Hidden Receiver Available for a 2023 Chevrolet Equinox Which Fits Behind Factory Cover?
- Q&A: Difference Between the Draw-Tite and EcoHitch Trailer Hitches for a 2023 Tesla Model Y
- Q&A: Trailer Hitch Recommendation for 2016 Dodge Grand Caravan
- Article: Which Hitches are Made in the USA
- Article: Trailer Maintenance Schedule