Roof Rack Recommendation for 2016 Ford Focus

Question

Question:

I need a roof rack for a 2016 Ford Focus

asked by: Eddie O

0

Expert Reply:

If your 2016 Ford Focus is a 4 door model you would want the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA and # DK307.

If you have a 5 door hatch model instead you would also want the part numbers # RRVA126B-2, # RRRLKVA and # DK307.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 4

Hey John, I used to have a 2013 Sienna, it was a great van. I can definitely help set you up with Rhino Rack Vortex Aero Crossbars for your 2014 Sienna. The Rhino-Rack #RRVA126B-2 that you mentioned is a set of crossbars only though, so additional…

view full answer...

Answer 5

After looking at the 2013 Ford Focus ST, I do not believe a roof rack and bike rack would interfere with the rear spoiler. It appears that the crossbars would sit several inches above the level of the spoiler. So you would be able to fit a roof rack…

view full answer...

Answer 6

I may have a solution for you, but the Rhino Rack #RRRBC050 does not have a way to carry tires wider than 2.7". If you' need a roof top carrier for a wider tire bike then I recommend using the Yakima Highroad #Y02114 since it can handle…

view full answer...

Answer 7

I have a similar solution that would work well for you but the bar width max that the Curt cargo basket part #C18115-117 can fit is 3 inches. Instead we have the Rhino Rack part #RRRMCB03 which measures 58-1/4" x 41" and will work great…

view full answer...

Answer 8

For your 2012 Ford Focus Hatchback we have roof racks like the Rhino Rack part numbers #RRVA126B-2, #RRRLKVA and #DK307 which will work great but this rack requires clamps that attach to the door frame of your vehicle. We don't have a confirmed…

view full answer...

Answer 9

The fit kit you referenced, #DK292, is not a fit for your 2014 Ford Focus. I recommend the Rhino Rack Vortex roof rack which uses the following parts: Vortex Crossbars, 49" long x 3-1/8" wide x 1-3/16" tall, part #RRVA126B-2 2500…

view full answer...

Answer 10

There is not a dual hitch receiver for the 1-1/4 inch receivers as they are not able to handle the torque due to the tongue weight location. The tongue weight of the hitch is reduced by 50% when using an adapter, so it really wouldn't be worth…

view full answer...

Answer 11

I measured the widths of the c-channel on the Rhino Rack Vortex Aero Crossbars and the bottom width is 7/8 inches and the neck width is 7/16 inches. I have attached a photo showing these measurements for you to check out. As long as the t-bolts on…

view full answer...

Roof Rack Recommendation for 2016 Ford Focus

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching