Availability of 5-Bolt Hub/Drum That Takes Bearings 25580 and LM67048

Question:

I would like to stay with the 5 bolt set up. My seal surface diameter on the spindle is 2.250, had a National 370219BG seal. Inner brg 4T-25580 but no # on the race, which measures 3.265. Outer bearing is LM 67048 and the race LM 67010 with about 3inch from the back of the inner bearing and the inside the outer bearing. Brake hub is welded. My hub failed breaking apart at the outer edge of inner bearing location. If the only option is 6 bolt, I will go with that as this is a slick very old tilt bed and works very well for the Bob Cat. Thank you for any input or part numbers etc.

asked by: Gary S

Expert Reply:

It sounds like you're looking for a replacement 5-bolt hub that takes bearings # 25580 and # LM67048. Matching the old hub's bearings to the replacement's is essential to ensure the new hub will properly fit on the spindle. We do have several hubs that take this same bearing set but they are all 6 or 8 lug types. You can see them all by clicking on the link provided.

For example, part # 8-201-5UC3 is a 12 x 2-inch hub/drum with a 6-on-5-1/2 bolt pattern for 5200-lb axles that takes 16-inch to 18-1/2-inch wheels. This hub kit include the hum/drum, bearings, races, seal, grease cap, wheel bolts and lug nuts.

I also included a link to all 6-on-5-1/2 trailer wheels in the 16-inch size.

expert reply by: Adam R