Trailer Hitch and Wiring for a 1989 Chevy K3500 with 10 Inch Deep Drop Bumper
Question:
1989 K3500 extended cab dually with 10 in deep tall bumper. Would like to pull at least 6000 lb trailer without weight distributing hitch. Will this hitch fit?
asked by: JW
Expert Reply:
Draw-Tite trailer hitch # 41528 does indeed fit your 1989 Chevy K3500 truck with deep drop bumper. It is rated for 6,000 pounds gross trailer weight when not using weight distribution.
If you want a hitch that has a little more wiggle room in terms of capacity you can use # C15317 which is rated for 16,000 pounds when not using weight distribution. Be sure to check the capacity of your truck and go by whichever has the lower capacity; the hitch or the truck.
If you go with hitch # 41528 then I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag.
For the Curt hitch you can use ball mount # C45340 with 2 inch ball # A-90 or 2-5/16 inch ball # C40008.
If either ball mount above does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring, if the extended cab is actually a 4-door crew cab then you can use # HM41115. If the truck is not a crew cab model use # 118315.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 17000 lbs GTW
- Class V
- CURT
more information >
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
![ballmount](https://images.etrailer.com/static/images/catg/faq/ballmount_150.jpg)
![Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM41115 Review](https://images.etrailer.com/static/images/faq/Demo-Hopkins-Custom-Fit-Vehicle-Wiring-HM41115_150.jpg)
![Trailer Hitch Installation - 1999 Chevrolet C/K Series Pickup - Draw-Tite](https://images.etrailer.com/static/images/faq/install-trailer-hitch-1999-chevrolet-ck-series-41528_150.jpg)
![Trailer Wiring Harness Installation - 1997 C/K Series Pickup](https://images.etrailer.com/static/images/faq/install-trailer-wiring-1997-chevrolet-ck-series-pickup-118315_150.jpg)
![Trailer Wiring Harness Installation - 1993 Chevrolet S-10 Pickup](https://images.etrailer.com/static/images/faq/Wiring-Harness-Install-1993-Chevrolet-S10_150.jpg)