How to Pick Out a Hub for a Lippert Axle
Question:
I am looking for hubs for my Lippert axle NV#176462. Lippert is not helping.
asked by: Mike P
Expert Reply:
I can help you find new hubs for your axle, but the Lippert number you gave does not cross reference with anything that I could find.
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: akihub~545~2~g~ez~1k
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Q&A: Tips for How to Identify a Trailer Axle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: 814202
- Q&A: Parts Needed for Brake and Bearing Replacement on Lippert 5200-lbs Axles
- Q&A: Lug Nut Size For Lippert 814202 6,000LB Drum Brake Hub
- Video: Review of Americana Wheel Lug Nut AM26NR
- Video: Review of DeeMaxx Trailer Wheel Acorn Lug Nut 1/2 Inch Diameter - DE93GR
- Video: Review of JR Products Door Holder - 37211825
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Search Results: dust caps