Best Weight Distribution Recommendation for a Trailer with an 800 lb Tongue Weight
Question:
Hi, I have a 2015 f-150 super crew cab with tow package truck and a 2016 Jayco 23RB trailer. Ball size is 2 5/16. Trailer dry weight is 4788lbs and tongue weight is 505lbs. Loaded with battery and propane and other I would think the tongue weight is closer to 800lbs. Can you recommend a sway control and weight distribution system? Thanks
asked by: Brian
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
If your loaded tongue weight is going to be right at 800 lbs then I would recommend the Strait Line System part # RP66084 as it has a tongue weight range of 600-1200 lbs and features the only sway control that works to prevent sway before it starts.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Weight Distribution Recommendation for Trailer with 900 lbs Max Tongue Weight Rating
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Correct Tire Pressure for ST235/80R16 Trailer Tires
- Q&A: Installing Trailer Brake Controller on 2018 Ford Transit T250 with Factory 7-Way
- Q&A: Will B and W Continuum Weight Distribution Work Well with East To West 2900KBH
- Q&A: Strait-Line Weight Distribution for a 2015 Ram 1500 and 2012 Windjammer Travel Trailer
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)