Will Hopkins 7-Way Trailer Harness # HM42190 Require Wire Splicing to Install in 2001 Dodge Dakota
Question:
Will this product simply plug into my factory wiring harness or will splicing/cutting need to be done?
asked by: William E
Expert Reply:
If your 2001 Dodge Dakota is equipped with a factory-installed 7-way connector then the Hopkins wiring harness # HM42190 that you referenced will be a direct plug-in installation with no cutting or splicing of wires needed.
I have linked a photo of the rectangular OEM-style connector that will mate with the one on your truck IF it has the tow package. You should be able to locate this OEM connector above the rear bumper if it is present.
If you do NOT have the tow package in your Dakota then in order to have a 7-Way you'll first need to install a 4-pole harness # 118329. An installation video is linked for you.
If you need 12V trailer power and a trailer brake circuit on the 7-Way you'll then use our # ETBC7 kit to convert the 4-pole to a 7-Way. If you only need the 4-pole's lighting signals, but in a 7-way format, then instead you'll just need the 7-Way adapter # 37185 which plugs right into the 4-pole.
![Adam R](https://images.etrailer.com/static/images/catg/people/477_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Hopkins Endurance Quick-Install 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: How to Install a Brake Controller on a 2015 Jeep Wrangler Unlimited with Factory Tow Package
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Why It Is Better to Replace Entire Trailer Brake Assembly When Pads Are Worn Out
- Q&A: Recommended Parts for Flat Towing a 2022 Jeep Wagoneer
- Q&A: Is the etrailer # e67ZR Tow Bar the Same As the Demco Excali-Bar III?
- Q&A: What is the Flashing Pattern of the Prostrobe White Side Marker Light PRS70753
- Q&A: What Size Hole Normally Gets Drilled to Install 7-Way
- Q&A: Can I Add A Wire Harness To My Camper To Make It Tow Another Utility Trailer