Can Weight Distribution be Used on Trailers with Angle Iron Frames
Question:
Is this compatible with angle iron A-frames? All the pictures and videos show tubular frames. Also, can you buy extra adapters for multiple trailers?
asked by: Mike
Expert Reply:
Trailer frame made of angle iron do not have enough surface area to safely attach snap-up brackets like those included with system # RP66542. But what you can do is use bolt on brackets # RP58305. You could get multiple sets of these for your trailers to use the weight distribution system on all of the trailers.
The only other issue is that if the trailers all have different tongue weights this system may not work for all of them. It has a tongue weight capacity range of 600 to 1,200 pounds. If the tongue weights of the trailers all fall within that range then you would just need the one system.
For any trailers with a tongue weight outside of that range I would need to know what the tongue weights are to recommend alternate spring bars to use with those trailers.
With the system you are looking at you will need to add a ball that fits the head. For a 2 inch ball use # A-90 and for a 2-5/16 inch ball use # 19286. I have included some links on weight distribution for you.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Article: Best Air Bag Suspension (2023)
- Video: SumoSprings Solo Rear Helper Springs Installation - 2023 Jeep Gladiator
- Search Results: weight distribution hitch
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Shop: Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: SumoSprings Solo Rear Helper Springs Review SS28UV
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Search Results: sumo springs
- Q&A: Recommended Rear Suspension Enhancement For 2020 Jeep Gladiator To Prevent Sag When Towing Trailer
- Video: Reese Weight Distribution - WD Only - RP66542 Review
- Video: Timbren Active Off-Road Rear Bumpstops Review
- Video: Review of CURT Weight Distribution Hitch - TruTrack With Sway Control - C17501
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Class IV Hitches for 2018 Ram 1500, 2500, and 3500 Trucks
- Video: Review of SuperSprings Vehicle Suspension - Jeep Gladiator Rear Axle Suspension Enhancement - SS62XR
- Shop: Timbren Active Off-Road Bumpstops - Rear Suspension - 3,000 lbs
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle
- Video: Reese Weight Distribution System Chain Hangers Installation
- Q&A: Recommended Weight Distribution Chain Hangers For Trailer With Angle-Iron Frame
- Search Results: blue ox shank
- Search Results: 2 inch ball
- Search Results: shank
- Q&A: Comparing the Stromberg Carlson Trailer Jacks # JET-5000NG VS JET-5000
- Q&A: Overall Height of the Ultra Fab Jack part # UF38-944037
- Search Results: blue ox rotating latch