Brake Controller 7- and 4-Way Installation Kit # ETBC7 Installation on 2001 Lexus LX470

Question:

You say that you uploaded an installation video, but there doesnt appear to be one anywhere. Is there an instal video for a 2001 LX470? Im trying to figure out getting the int 4 to 7 pin kit you offer, but Id like to see the video you mentioned. Thanks.

asked by: Brian

Expert Reply:

The procedure for installing a brake controller doesn't really vary much from vehicle to vehicle. I've linked you to a 2-part video showing the # ETBC7 kit being installed on a 2008 FJ Cruiser. On your LX470, you'll need a functional 4-pole trailer connector. If you don't have one, you can install one using part # 119178KIT. We do not have a video of the 2001 Lexus LX 470 at the present time.

The only other thing that will vary from vehicle to vehicle is the color of the brake stoplight switch wire that the red wire from the controller needs to be tapped into. Use a circuit tester like part # PTW2993 to test the wires exiting the switch located at the top of the brake pedal. You're looking for the switch that only shows voltage when the brake pedal is pressed. Once you find it, tap the red wire from the controller into that circuit.

Everything else will be almost identical to what's shown in the video.

expert reply by: Chris O