Ball Mount with a 6 Inch Rise and 1 Inch Diameter Ball Hole
Question:
I am in need of a fixed 6inch rise with 1inch ball hole ball mount for my class V 2inch receiver....Do you have anything that will work? Im not finding in on the website. I forgot to mention that hitch is Curt and installed on 2013 Nissan Frontier Crew. So standard length would be fine and I prefer a 90 degree mount. I have a 7 inch rise now with a 2 3/4 inch high 2inch ball. My problem is the tail gate hits the ball if I it down. I need at least another 1 to 1 1/2 inch more clearance thus the shorter rise. A new ball with a short neck might help?
asked by: Bill
Expert Reply:
We have some options for ball mounts that have a 6 inch rise. Curt ball mount # C45090 has a 6 inch rise and when in the rise position it is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. The rise is measured from the top of the receiver opening to the top of the ball platform.
We also have # C45100 with 6-1/4 inch rise. Capacity is the same as the above ball mount.
For 5 inches of rise we have # C24WR rated for 8,000 pounds gross trailer weight. I have linked videos for you.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Aluminum Shank - Silver
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 8000 lbs GTW
- Class IV
- CURT
more information >
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 7 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: Curt Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 8,000 lbs - Aluminum
- Shop: 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Stainless - 7.5K
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Tire Sizing
- Q&A: Trailer Jack that Doesnt Hang Down Very Far for a Big Tex Utility Trailer
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How Much Drop Does the Reese 3357 Weight Distribution Shank Provide
- Q&A: Can Weight Distribution System Be Used on Aluminum Trailer Frame
- Q&A: How to Pick Out Correct Rise/Drop Ball Mount for 2016 Honda Odyssey
- Q&A: Replacement Hinge Insert Support for Rhino-Rack Batwing Awning
- Q&A: Weight of the 24x60 Reese Cargo Carrier # 63153
- Article: Trailer Maintenance Schedule
- Article: Roadmaster Vehicle Specific Base Plates