How to Determine Lug and Lug Nut Size and Bearings Needed for a 1998 Trail Lite Trailer
Question:
lug and lug nut size and bearings on my 98 trail lite 25 foot Hi as you can see from above I am looking for the specs and part numbers if you have them by chance?
asked by: Rob
Expert Reply:
In order to find the right parts for your trailer I would have to know the inner and outer bearing numbers stamped into the sides of the bearings. If the bearings are not available or you can't read them then you can measure the spindle.
The measurements have to be as accurate as possible so you will need to use dial or digital calipers to take the measurements. I have included a picture showing where you will need to measure.
With the above information I will be able to tell you everything you need to know!
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - L44649
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes