Using Shorter Equalizers When Replacing Suspension Components
Question:
I need to replace the suspension parts on a flatbed trailer. However, the hangers are 30inch apart on center, the equalizers are 8inch on center. I am considering the APT9 kit as I have 2.5inch hangers. Is there another option? or would I need to reposition the front and rear hangers to allow the APT9 install? Thank you for your help.
asked by: Ken B
Expert Reply:
The #APT9 kit will work well for you. Since the equalizers are only 1/4 inch shorter than your current ones, the shackle straps should provide you with enough play to be able to place the new hangers in the same position as your current hangers.
If you'd like to give yourself a bit of extra room, you could get longer shackle straps to use in place of the ones that come in the kit. For example, the shackle straps in the kit are 2-5/8 inches long, but you could use # TRSL275 shackle straps that are 2-3/4 inches long instead.
Products Referenced in This Question
- Trailer Suspension Parts
- Shackle Links
- Camper
- Car Hauler
- Utility Trailer
- 2-3/4 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center
- Shop: Dexter Bronze Bushings - Qty 4
- Video: Review of etrailer Trailer Leaf Spring Suspension - Spring Mounting Hardware - APT8
- Shop: Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Shop: Replacement Tire for Trailer Valet Swivel Jack and Trailer Mover - Qty 1
- Shop: Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens
- Search Results: road armor
- Q&A: What Are The Two Upper Holes In Short Hangers In Tandem-Axle Trailer Hanger Kit APT8 For?
- Q&A: Does Trailer Suspension 7-3/4 Inch Equalizer EQ-E1 Have a Weight Capacity
- Q&A: Troubleshooting Trailer Shackles that Reverse on a Trailer Over Bumps
- Q&A: How to Find the Correct Replacement Equalizer
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Search Results: 72~42
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23003 Review
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Manufacturer Demo
- Search Results: equalizer
- Q&A: MORryde Equalizer Upgrade for 2019 Jayco 321RLTS 5th wheel
- Q&A: Should MORryde Equalizer Kit MR87ZR Or MR27ZR Be Used With 35" Axle Spacing?
- Q&A: Torque Spec for Tightening Nuts of 1/2 inch Diameter Trailer Suspension U-Bolts
- Video: Review of etrailer 4 Leaf Double Eye Spring - e97SR
- Article: Slipper Spring Trailer Suspension System Review
- Search Results: shackle strap
- Search Results: trailer equalizer