bing tracking image
Q & A Icon

What is the Distance Between Weld Stops on Stromberg-Carlson Landing Gear Set LG-1  

Question:

what is the distance between the clips or extrusions on this jack?, the distance between on my existing landing gears is 17 1/2 inches, top of top clip to bottom of bottom clip, this is important because my u clips are welded on and replacement landing gears need to be the same. My existing gears that failed were made by Fulton, any help will be greatly appreciated, thanks.

0

Expert Reply:

The weld stops on the legs of Stromberg-Carlson landing gear set # LG-1 are indeed 17-1/2 inches measured from the top of the top one to the bottom of the bottom one. If you look at the diagram I have included you will see that they have measured from the top of one to the top of the other and that is 16-1/2 inches. Since the weld stops are 1 inch tall the measurement is 17-1/2 inches just like what you need!

expert reply by:
0
Michael H
click to enlarge

Jim B.

8/1/2020

Is the Stromberg Carlson LG 1 an appropriate replacement for a 2010 Jayco 28.5

Etrailer Expert

Jon G.

8/11/2020

As long as the weld stops of your current landing gear match up with what Michael mentioned above then the # LG-1 will work great!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>