Replacement Hub, Bearing Buddy, and Rim/Tire for a Dexter 9-81A Hub
Question:
I need to know if these parts will work together before I finalize my purchase. The hub is from a spartan trailer with a dexter torflex axle the hub was stamped 8-91a bearing is a LL44649. Dexter Trailer Hubs and Drums - 8-91-05UC1 Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check Kenda 215/60-8 Bias Trailer Tire with 8inch White Wheel - 4 on 4 - Load Range C
asked by: Aaron
Expert Reply:
There are two different Dexter 8-91 hubs that are available for a 2000 lb axle that will use different size bearings and seals. You will want to use the correct bearings and seal that are designed for that particular hub.
The Dexter Trailer Hub Assembly, part # 8-91-05UC1, comes with the # L44649 inner and outer bearings, the # L44610 races, the # 10-9 grease seal, and the # RG04-020 grease cap.
The Dexter Trailer Hub Assembly, part # 8-91-05UC1, comes with the # L44643 inner and outer bearings, the # L44610 races, the # 34823 grease seal, and the # RG04-020 grease cap.
The Dexter hub 34822BX should have a #8-91A stamped on the back of the hub.
Either way you would want the part # BB1980A for a Bearing Buddy and the part # AM3H290 would fit and work well as a rim and tire replacement.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 215/60-8
- 8 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Article: Trailer Wiring Diagrams
- Article: Car Camping Checklist
- Q&A: Repair Kit Availability for a 5125 Valley Coupler
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes