Trailer Hitch Recommendation for 2010 Hyundai Santa Fe that Keeps Full Size Spare
Question:
Re: Draw-Tite #75684 Hitch I read that with this hitch installed on my 2010 Santa Fe SE, there should be no problem lowering and raising the spare tire, but it did not say what size tire. Im thinking that your answer may apply to the 17inch wheels. However, I have the standard 18inch alloy wheels and the 18inch space saver spare. Will the #75684 after being installed interfere with the proper seating of either my 18inch space saver or my alloy wheel/tire when I try to crank it back under the car? Thanks for your help
asked by: David
Expert Reply:
The Draw Tite Hitch part # 75684 that you referenced has been confirmed as a fit for your 2010 Hyundai Santa Fe and would work just fine with your 18 inch spare tire. When raising and lowering the spare you will need to angle it slightly so that it can fit around the hitch cross tube, but it will work just fine.
Check out the install video I attached as well. This is one of the easiest hitch installs as nothing needs to be lowered/removed prior to installation. A lot of hitches require the exhaust and/or spare to be lowered first, but not this one.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Comparing Curt # 13195 and Draw-Tite # 75908 for 2017 Kia Sorento
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Q&A: How To Determine if a 2011 Kia Sorento has the Factory Towing Prep Package
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: How to Tell if 2020 Kia Sorento Has Factory Tow Package
- Q&A: Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
- Q&A: How to Determine if a 2013 Kia Sorento has a Factory Towing Prep Package
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes