Availability of Various Depth Ventline Roof Garnishes

Question

Question:

re: replacement garnish for my Ventline RV roof vents with fan #V2094-601-00. Your part #BVC0573-31 looks the same but ?? My roof is about 2 5/16 thick. The garnish that came with the unit is about an inch short. So what Im looking for is to replace the ones I have with one that will fit my roof.

asked by: Arnold W

0

Expert Reply:

We have several Ventline roof vent garnishes that could work for you.

The part # VA0445-34 is 2-1/8 inches deep, the part # VA0445-37 is 5-1/8 inches deep, and part # VA0445-27 is 3-1/8 inches deep.

expert reply by: Jameson C

0

Answer 1

Yes, the Ceiling Garnish for Ventline Roof Vent part #VA0445-37 will fit the Ventline Ventadome Trailer Roof Vent part #V2110SP-24. Please keep in mind that the garnishes can be trimmed for an exact fit. The metal lid will hold up much better to…

view full answer...

Answer 2

Both the Ventline Ventadome Roof Vents you mentioned in your question, the White #V2092SP-25 and the Smoke #V2119-603-00 have translucent covers, which will allow for some light to shine through into your RV. The smoke color Roof Vent will act more…

view full answer...

Answer 3

RV roof vents are typically all 14" x 14" and require a 14-1/4" x 14-1/4" hole to install. Manufacturers have started prepping enclosed trailers with frame work to support a vent installation but I can't confirm whether or not…

view full answer...

Answer 4

It is likely the Ventline Ventadome Trailer Roof Vent #V2092SP-25 will fit your 2017 Wolf Pup 17RP but you do need to take some measurements to find out because vents are universal parts and are not designed to fit any specific trailer. That said,…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 9

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 10

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 11

Hey Bruce, for a replacement Fan-Tastic brand RV roof vent I really like the part #FV803350 as it has a variable speed, reversible fan, a built in thermostat, power lid lift, and a rain sensor to auto close it in case it starts raining. The only…

view full answer...

Answer 12

The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be a…

view full answer...

Availability of Various Depth Ventline Roof Garnishes

Products Referenced in This Question

Continue Researching