How to Measure for Selection of the Correct Bearing Buddy Bearing Protectors
Question:
How i measure to determine what size I need?
asked by: Colby
Expert Reply:
There are two ways to measure to determine the correct size of Bearing Buddy Bearing Protectors you will need.
The First way is to measure the outside diameter of the bearing cap installation surface. If the bearing caps are removed gently without deforming them then this is the easiest way to measure. You will need to use a Dial Caliper to take these fairly precise measurements.
The other method of measuring also requires the use of a dial caliper. You will need to measure the inside dimension of the hub that the bearing cap press fits into.
With one or both of these dimensions you should be able to select the proper Bearing Buddy Bearing Protectors, like item # BB2717, to install in the hubs of your trailer. If your hub measurement is 2.717 inches then the # BB2717 bearing protector will work with the hub on your trailer.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.717 Inch
- Bearing Buddy
more information >
Continue Researching
- Search Results: electric drum brakes trailer brakes
- Shop: Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated (Pair)
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Suspension Enhancement
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Firestone Airide Red Label Extreme Duty Air Helper Springs - Rear Axle
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Article: Overview of Lubricating Grease
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Replacement Hub Recommendation for Hub Stamped 8-219
- Video: Trailer Brakes and Wiring Installation
- Q&A: Greasing Bearings and Hub for Dexter EZ Lube Hub and Drum for 5.2K to 7K Axles, 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Search Results: ez lube bearing kit
- Search Results: 16 inch load range g
- Search Results: bearing buddy 2717
- Search Results: 110 psi rims
- Search Results: axel grease
- Search Results: ez lube spindle
- Q&A: Which is Best Brand of Trailer Brake Assemblies
- Q&A: How to Identify Correct Replacement Grease Seal for Boat Trailer
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: How Does Inner Bearing Get Grease When using Bearing Buddy
- Q&A: Correct Bearing Buddy Bearing Protectors for 7K Axle with 14125A Outer Bearing
- Video: TruRyde Electric Trailer Brake Kit Installation
- Video: Review of Lippert Anti Billowing Kit Solera Slide Out Awning - LC78FR
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3S451 Review
- Shop: Spare Tire Cover
- Shop: RV Roof Membrane
- Shop: RV Exterior Lighting
on Trailer Bearings Races Seals Caps
