Recommended Sway Control For Trailer Without Weight Distribution System Installed
Question:
I do not have a weight distribution system. I am looking at Curt friction sway bar. I am only wanting the anti-sway bar. The question I have is: What does it mean when it states shank not included?
asked by: Ron C
Helpful Expert Reply:
Typically, when a statement like shank not included is mentioned it is pertaining to a weight distribution system. Since you said you do not have a WD system and only want to install sway control it would not be needed.
If you choose to install a sway control unit like the Curt Friction Sway Control, part # 17200 without a weight distribution system installed you will need a bracket that attaches to your ball mount. If you have a 2 inch drawbar I recommend part # RP26003, and for a 1-1/4 inch drawbar you would need part # RP26005. The other end of the sway control uses the included bracket and is mounted to the trailer.
Please keep in mind this sway control is not for use on trailers with surge brakes, and it is recommended you remove the sway control when towing in slippery conditions.
Products Referenced in This Question
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Reese Sway-Control Bracket for 1-1/4" Drawbars - Class II
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Flexco Double Step Width Dimensions
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Break Control Installation for Tekonsha Prodigy P3 on 2019 Mercedes-Benz Sprinter 3500
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Which Connector Is Needed To Install Curt Spectrum Trailer Brake Controller On a 2018 VW Atlas?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Are the Dimensions of the Furrion Die-Cast Grates for RV Stove
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch