Trailer Hitch and Wiring Harness Recommendation for 2006 Mercedes-Benz ML350
Question:
Needing to purchase the hitch and wiring for a 2006 Mercedes ML350. BlueTEC but no air suspension. What products would I need?
asked by: Bryan
Expert Reply:
Of all the 2-inch Class III hitches we offer for your 2006 Mercedes-Benz ML350 I recommend the Curt # 13342. The installation process includes some drilling and all required hardware is included with the hitch. I have linked the written instructions as well as two helpful articles concerning hitch installation that will make the process easier.
Please note none of the available hitches will fit your ML350 if it has the OEM Air Suspension System.
You will also need a ball mount, hitch ball and a hitch pin and clip. You can use ball mount # C45010 and either 2-inch ball # 63845 or 1-7/8-inch # 19260. For a pin and clip use part # PC3.
For a wiring harness I recommend the Curt # C59236 because it will help protect the ML350's taillight circuit from excessive power draw from the trailer lights. Your install will be easier if you have a circuit tester like # PTW2993 which will make it simple to identify the wire functions. A wire's color is not a reliable way to tell what function it carries. Testing removes all doubt and will avoid any risk to the harness and vehicle.
I linked the written instructions for the harness, an install video as well as a helpful article to aid your wiring installation.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Roof Rack
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Removing Rear Bumper To Install Curt Trailer Hitch # 13342 on 2007 Mercedes ML350
- Shop: Trailer Wiring
- Search Results: roof rack
- Q&A: Can Hard Cover be Put Back On 2008 Toyota RAV4 Spare Tire After Removing Spare Ride Bike Rack
- Q&A: Third Brake Light Wiring for 2019 GMC Sierra 3500 with Pacer Performance Logic Module
- Q&A: Trailer Hitch for 2015 Mazda CX-5
- Q&A: Can a Roof Top Cargo Basket Carry a Kayak
- Q&A: Installing a Battery on a Trailer and Wiring it to Run Interior Trailer Lights
- Q&A: Does Curt Hitch C12170 Fit Early Versions and Later Versions of the 2016 Mazda CX-5
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
- Shop: Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Extension Piece for Rhino-Rack Sunseeker 49 Sq Ft and Batwing Compact Awnings - 43 Sq Ft
- Shop: Yakima FlushBar Conversion Kit for Whispbar Clamp and Fixed Point Mounting Fit Kits
- Shop: Tailgate
- Shop: Replacement Mirrors
- Shop: Vehicle Engine Heaters
- Shop: Truck Tailgate Lock
- Video: etrailer.com Trailer Hitch Receiver Installation - 2016 Mazda CX-5
- Article: How to Choose the Right Trailer Hitch Class