What is the Outer Diameter of the Center of Trailer Hub Assembly # 8-258-5UC1
Question:
What is the diameter of the hub seat the part that the center hole of the wheel fits over? Im wondering if a wheel with a 73mm center bore will fit. Thanks!
asked by: Sam F
0
Expert Reply:
I went out to the warehouse and pulled Trailer Hub Assembly # 8-258-5UC1 to measure the outer diameter of the center. It measures 2-1/2 inches or 63mm in diameter at the base so a wheel with a 73mm pilot hole will fit.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Most Popular Wheel Bearings
- Q&A: Solution to Replace 8k Kodiak XL NevR Lube Hub Drums
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is the Length of the Trailer Idler Hub Assembly # TA88545-2
- Q&A: Replacement Brake Assembly for Trailer Part Number 023-327-00
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Measuring a Trailer Tire