Can I Turn or Grind Disc Brake Hub/Rotor to Remove Rust
Question:
I have kodiak 10inch discs on my12 year old boat trailer and I am rebuilding the the brakes .I took the caliper off and noticed the disc surface to quite rusty and pitted , can I get these dics turned ?
asked by: Bill
0
Expert Reply:
I spoke with my contact at Kodiak and he said that yes you can turn the disc brake hub/rotor to remove the rust and pits. Etched into the backside of the rotor there will be a minimum width clearance or minimum rotor thickness that you can turn to.
expert reply by:
Chris O
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate - 3,500 lbs to 6,000 lbs
- Shop: Westlake ST205/75R14 Radial Trailer Tire - Load Range D
- Q&A: Trailer Wheel Seems Stiff, Not as Easy to Turn After Repacking Bearings with Grease
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Kodiak Brake Pads Review and Installation
- Video: Kodiak Trailer Brakes K225CPSS Review
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: boat trailer brake kit
- Q&A: How To Choose Correct Replacement Hubs for 2005 Wesco Boat Trailer
- Shop: Kodiak Trailer Wheel Lug Nut - Stainless Steel - 1/2" - Qty 1
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Replacement 10" Rotor for Dexter Disc Brakes - 5 on 4-1/2 - E-Coat - 3,500 lbs
- Search Results: stainless lug nuts
- Shop: Trailer Wiring
- Search Results: l68149
- Search Results: disc brake kit
- Search Results: kodiak brake caliper
- Search Results: brake caliper
- Search Results: 13~105
- Video: Review of Dexter Trailer Leaf Spring Suspension - Bushings - D014-077-00
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Comparing Bronze and Nylon Bushings for Trailer Suspension
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Spring Mounting Hardware - K71-360-00
- Q&A: Wet Suspension Bolt vs a Regular Suspension Bolt
- Q&A: Do Trailer Shackle Bolts Require Splines to Prevent Wear from Occurring
- Video: Review of Bearing Buddy Bearing Buddy - Bearing Buddy Bra - BB19B
- Q&A: How to Clean a 7-Way Trailer Wiring Connector
- Q&A: Recommended Transom Straps for 261 Cobia
- Video: Titan Replacement Master Cylinder Assembly Installation