Toolbox Tray Recommendation for a 20 inch Wide Toolbox

Question

Question:

do you have a 20 in wide truck toolbox tray

asked by: Carlos T

0

Expert Reply:

If you have a Deezee 20 inch wide red label toolbox we have a tool box tray that would work for you. For that you would want the part # DZTBTRAY1. This measures 18" x 15-1/2".

expert reply by: Jameson C

0

Answer 1

As you mentioned, the existing lock barrel is held in place by the retaining nut on the inside of the box. Try giving the nut a good shot of a spray penetrant and letting it soak for awhile. Apply a wrench to the nut, and use a crescent wrench to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The safe GVWR rating is 80-85% of total weight capacity to allow for any additional weight added to the trailer. So for a 16k pin box you'd be looking at 12,800lbs - 13,600lbs as a safe weight. I looked up your current pin box with the LCI Number…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

The Trailair Tri-Glide was indeed replaced by the Trailair Flex Air. The reason for this was due to a lack of reliability with the roller pin system that allowed the kingpin to rock back and forth with the motion of the trailer therefore limiting…

view full answer...

Answer 10

The air bag kit I recommend for your 2022 Ford F-250 Super Duty with 4-wheel drive is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. This hybrid spring system combines the adjustability of air springs with the reliability of…

view full answer...

Toolbox Tray Recommendation for a 20 inch Wide Toolbox

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching