Converting Drum Brakes on 5th Wheel Trailer to EOH Disc Brakes
Question:
I have 6ooo# Lippert axles with 12inch drums, 8 lug, 16inch wheels. The 5th wheel is a 2013 Sabre Palamino 32rtcs. Which product will fit?
asked by: David H
Helpful Expert Reply:
Converting a 5th wheel trailer from electric drum brakes to electric-over-hydraulic disc brakes will require a couple of items: the disc brake kit of hub/rotors and calipers, a brake line kit, an electric-over-hydraulic actuator, a breakaway kit and a brake controller such as the excellent Prodigy P3 # 90195. The linked article covers each of these items and is a good starting point for planning your project.
A link is provided that will show you all disc brake kits with the 8-on-6-1/2-inch bolt pattern. These kits start at a 7K rating, use 13-inch rotors and are suitable for 16-inch and larger wheels. You have options for the materials and finish, including raw finish, protective E-Coat, Dacromet or stainless steel.
For a tandem axle brake line kit you'll use Demco # DM5425 and for an electric-over hydraulic actuator you can use the CTS # HBA16. For a breakaway kit I suggest Tekonsha # 50-85-313.
Finally the brake controller I recommend is the Tekonsha Prodigy P3 # 90195 which is among the easiest to use and most reliable units on the market.
Products Referenced in This Question
Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Trailer Breakaway Kit
- Kit with Charger
- Top Load
- Single-axle
- Tandem-axle
- Triple-axle
- LED Tester
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Demco Hydraulic Brake Line Kit for Tandem Torsion-Axle Trailers - Drum or Disc Brakes
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 15 Feet Long
- Brake Lines
- Steel Line and Flexible Hose
- Brake Line Kits
- Tandem Axle
- Demco
more information >
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Replacement Automotive Lighting
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: What is the Fuse Rating and Power Wire Gauge Used for Trailer Wiring Harness # 118571
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Q&A: Correct Disc Brake Conversion Kit for 2022 Grand Design Momentum 397THS
- Q&A: Do I Really Need To Repack Bearings Every 12 Months If I Have Low Mileage On Trailer
- Q&A: Recommended Disc Brake Conversion Parts for a 5th Wheel Trailer w/ 8,000 lbs Axles
- Q&A: Recommended Disc Brake Conversion Kit for 2021 Grand Design Momentum 351 5th Wheel Toy Hauler
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Types of Bumpers
- Article: Calculating Portable Generator Power Needs