What Quick Links Are Supplied with Curt Single Hook Coiled Safety Cables # C80136

Question

Question:

Which quick links were used with these?

asked by: Tammy

0

Expert Reply:

The quick link included with Curt Single Hook Coiled Safety Cables # C80136 is their part # C81840. This it rated for 3500-lbs. This item is sold individually so you'll need to order two for a set of safety cables. Curt also offer a higher-rated item, part # C81830, rated for 7600-lbs.

We also offer links like # C82932 from Curt.

expert reply by: Adam R

0

Answer 1

The distance from the back of the 2 inch hitch opening of the Brophy Hitch adapter part #HT5R back to the center of the hitch pin hole on the 1-1/4 inch shank is 3-3/8. I attached a picture where that dimension has been added as well.

view full answer...

Answer 2

Since safety chains pivot underneath the trailer when making turns it's typically not a situation where a significant length of safety chain is needed to allow sharp turns to be made. Basically you'd want to measure the distance between the…

view full answer...

Answer 3

The Trailer Hitch Adapter #e93YR is the closest extender/riser to the Trailer Hitch Extender #e68YR you found. The adapter does change from the 1-1/4" receiver to a 2" receiver for the accessory. You would need the Reducer #e63YR to get…

view full answer...

Answer 4

Lifting your parked RV will help protect your tires from flat spots but stabilizer jacks like #UF48-979002 or #TJ01RT-HD are not suitable since they are not designed to handle the entire weight of the RV, only to support/stabilize a portion of it. A…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 10

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

What Quick Links Are Supplied with Curt Single Hook Coiled Safety Cables # C80136

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching