Wheel Size Fit Clarification for the Wheel Net for Ultra-Fab Tow Dolly # UF46-700034

Question

Question:

Hi, I am interested in purchasing your UF46-700034 Wheel Net for Ultra-Fab Tow Dolly - 14inch to 16inch Tires, Wheel straps. I am confused about the fitment information. You say they are intended for 14 to 16inch tires. I am assuming these numbers represent rim diameter, not tire diameter. If so, I dont understand what rim diameter has to do with whether or not the strap will fit. Its the tire that the strap has to go around, not the rim. Depending on the profile of the tire a small rim can have a large diameter tire and vice versa. The car I plan to use these on has winter tires that are 25inch in diameter and summer tires that are 26inch in diameter. How can I find out if they will fit? Thanks

asked by: Paul E

0

Expert Reply:

The wording of the description is a bit confusing for the Wheel Net for Ultra-Fab Tow Dolly # UF46-700034. This net is designed to fit most tire sizes that are on 14 to 16 inch rims. These would work well on both of your tire sizes that are between 25 and 26 inches in diameter.

expert reply by: Jameson C

0

Answer 1

We have the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Extra-Wide Tire - Vertical Mount - 3,335 lbs #BDW20362 which is very similar to a wheel net and is compatible with diameters up to 37 inches. It is 9 inches wide so it won't fit…

view full answer...

Answer 2

The only axles we have hubs for that do not have spindles are the Replacement Hub Assembly for Demco Kar Kaddy Tow Dolly - Qty 1 #DM04369 These have the rectangular mount you mentioned but we do not have any brake options for these hubs. If you want…

view full answer...

Answer 3

Demco doesn't have a big list out there of what tires work with the 3-Point Standard Wheel Tie-Down Strap #DM03528 (because that would be huge) but they do have a calculator that can be used to determine what size you need for your tire size. If…

view full answer...

Answer 4

The Ultra-Fab Wheel Net #UF46-700034 that you referenced is a universal-type wheel net so the manufacturer doesn't list specific tow dollies compatible with the straps. You will want to take a look at your Maxey Tow Dolly and the size of the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Skid wheels like the part #UF48-979021 that you referenced installed on the hitch and frame would be one solution to help prevent the dragging. While we don't have an air bag system we do have a lift kit part #RR23QX that will give you an…

view full answer...

Answer 7

One solution would be to wrap the wires that contact the vehicle in electrical tape. Electrical tape is soft and will not scratch or scuff the vehicle paint. It will also help to protect the wires for the elements. The downside is that a lot of…

view full answer...

Answer 8

I believe the metal part you are referencing is the metal part that is already attached to the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly - Left Side part #DM5982 I have attached a picture for you to look at from the web page…

view full answer...

Answer 9

Yes, the Replacement 3-Point Small Wheel Tie-Down Strap for Demco Tow Dollies #DM03528-81 that you referenced would fit the smaller 14 inch wheel size you have on your Chevy Sonic.

view full answer...

Answer 10

I found the owners manual for your 2019 Chevy Spark and found the procedure they list for towing the vehicle with a dolly like the Demco #DM9713045 you referenced. To tow the vehicle with the two rear wheels on the ground and the front wheels on a…

view full answer...

Wheel Size Fit Clarification for the Wheel Net for Ultra-Fab Tow Dolly # UF46-700034

Product Page this Question was Asked From

Continue Researching