Trailer Brakes Activate Every Time Turn Signal is Used
Question:
Hi. I install electric brakes in my trailer. Brakes work but every time I use the turn signal the brakes start braking with the turn signal too. every blink stop and go. What I did wrong. Thanks
asked by: Rey
Expert Reply:
It sounds like you wired the brakes into the combined stop/turn signal circuit on the trailer. Trailers use what is called a combined system meaning that the brake lights and turn signals are on the same tire. So when you are using the turn signal the wire is energized and will apply the trailer brakes when the light blinks.
To use the electrical trailer brakes you have to have a dedicated wire just for the brakes and you must use a brake controller in the tow vehicle. The most common set up is to have a 7-Way blade style trailer connector on both the tow vehicle and the trailer.
I can make some recommendations but I would need to know the year, make, and model of the vehicle and what type of trailer connector it is using (4-Way, 5-Way, 6-Way, or 7-Way).
Product Page this Question was Asked From
Continue Researching
- Shop: Brake Controller
- Video: Curt Hitch Ball - Trailer Hitch Ball - 40038 Review
- Shop: Trailer Wiring
- Shop: Autowbrake Electric Brake Controller - Trailer Mount w/ Remote Fob - 1 to 3 Axles - Proportional
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: 8 inch rise hitch
- Search Results: hitch ball
- Shop: Trailer Hitch
- Q&A: Replacement Demco Coiled 7-Way To 6-Way Diode Wiring Kit Cable
- Shop: No-Drill Mount Bracket, Long
- Q&A: Steering Wheel Shakes in Vehicle While Towing Trailer
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: etrailer Universal Kit for a Trailer Brake Controller Installation - 2015 Toyota Highlander
- Video: Autowbrake Electric Brake Controller Review
- Video: Review of Tow Ready No Drill Mount Bracket - 18136
- Shop: Demco 7-Wire to 6-Wire Coiled Electrical Cord w/ 6-Way Round Plug - 7' Long
- Q&A: Why Does My Vehicle Have Separate Turn and Brake Signal Wires
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Recommended Torque for Tightening Curt Hitch Balls to Ball Mount
- Q&A: How to Get Separate Turn Signals and Brake Lights to Work on a Trailer
- Q&A: Separating Trailer Turn Signals and Brake Lights
- Q&A: Will the Using the Autowbrake Electric Brake Controller Key Fob Activate Trailer Lights
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Tow Bar Brake System
- Search Results: etbc7
- Video: Curt Trailer Hitch Installation - 2019 Cadillac XTS
- Search Results: 37185
- Search Results: brake controller