Using Hydraulic Trailer Brakes on Timbren Axle-Less Suspension 3500 Pound Axles
Question:
It seems most of the correspondence Ive read deal with electric brakes. Can the axle-less suspension systems be used with a hydraulic surge brake system such as DICO? If so, what hydraulic system would you recommend for a 3500lb axle-less suspension with 14inch tires? I would use 2 sets of 3500 lb axle-less systems total 4 tires to carry a load of approximately 4,400 lbs and would like to install brakes on only the rear pair of wheels Thank you for your assistance
asked by: Ron S
Expert Reply:
What you would need is a Timbren Axle-less suspension system that just has spindles, # ASR3500S04. Then you could add the appropriate hydraulic brake assemblies, 4-bolt mounting pattern, and matching drums.
The hub and drum assemblies used will need to use inner bearing L68149 and outer bearing L44649.
I have included a link to the brake assemblies that you can use. For a hub and drum assembly that works with the EZ lube spindles on the Timbren system you can use # 84546UC3-EZ.
If you are going to put brakes on just one axle then usually they go on the front axle. On a hydraulic braking system, they will also be more responsive on the front axle compared to the back.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Mounting Dimensions of the 3,500 lb Timbren Axle-Less Suspension System # A35RD545E
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Q&A: How Close Does Trailer Ball Height Need to be to the Height of the Trailer Coupler
- Q&A: Can 4 inch Drop Axle be Replaced with Straight Axle
- Q&A: Parts Needed To Add Electric Brakes Onto a 3,500LB Dexter Axle Without Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Raise Your Travel Trailer Height