Replacement Truxedo Tonneau Cover For 2004 Ford F-250 With 6-3/4 Ft Bed

Question

Question:

Trying to find soft replacement cover for my 04 ford 250 6.5 bed. Truxedo TonneauTrax. I have looked everywhere. Another site has them but cant cross reference their part#s Can you help me?

asked by: Kenton S

0

Expert Reply:

The Truxedo Tonneau cover we offer for your 2004 Ford F-250 with the 6-3/4 ft bed is the TruXedo TruXport Soft Roll-Up Tonneau Cover part # TX259101.

We also offer replacement covers for the TruXport. For a replacement cover you would need to order part # TX259101-CVR. This is the replacement cover and does not include the frame.

Per Truxedo, the Trax system has been discontinued.

expert reply by: Jeffrey L

0

Answer 1

Thanks for all of the info on the tonneau cover of your 2012 Ford F-250 short bed. For a replacement you'd just need the part #TX569101-CVR.

view full answer...

Answer 2

When it comes to replacement parts for your Truxedo Soft Roll Up we can help. The Velcro Strips #TX1705183 replaces the worn out or missing loop strip that is sewn into the edges of the vinyl on your Truxedo cover. They are sold in 3 foot lengths.…

view full answer...

Answer 3

The date code you kindly provided identifies your existing tonneau as a TruXedo Lo Pro #TX569101, according to my TruXedo representative. The replacement tarp for that cover is part #TX569101-CVR.

view full answer...

Answer 4

The correct replacement tarp for your 2008 Ford F-250 short bed with a Truxedo Lo Pro tonneau is the part #TX569101-CVR since the cover you have would be the #TX569101.

view full answer...

Answer 5

You will need the Replacement Cover #TX569101-CVR for the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX569101 on your 2011 Ford F-350 short bed truck. The Replacement Cover #TX259101-CVR fits the TruXedo TruXport Soft, Roll-Up Tonneau Cover…

view full answer...

Answer 6

The Replacement Cover for TruXedo Lo Pro QT Soft Roll-up Tonneau Cover Black #TX259101-CVR is meant to be a replacement cover for TruXedo Lo Pro QT Soft Roll-up Tonneau Cover Black#TX259101. Which is not a confirmed fit for the 2007 Chevrolet…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Truxedo Tonneau Cover For 2004 Ford F-250 With 6-3/4 Ft Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching