How to Determine what Replacement Bearings, Races and Seals for a Trailer Spindle on a 3500-LB Axle
Question:
I have a 3500 lb boat axle that uses 1 3/8 inners and 1 1/16 outters. What bearing kit do I need to order?
asked by: Scott
Helpful Expert Reply:
Your measurement of 1-1/16 equals to 1.0625 inches and most likely the bearing is # L44649 and the inner bearing is # L68149.
With that said, I think bearing kit # BK2-100 will work, but I strongly recommend looking at your bearings, races and seal for part numbers or taking a few measurements.
The best way to determine the correct parts for your 3,500 pound boat axle trailer, is to remove the hub from the trailer and either get part numbers from the inner and outer bearings and races, and grease seal or measure the spindle in 3 places and the hub in two places.
I have included a photo showing the places to look for part numbers and places to measure. If the part numbers are not visible on your bearings, races and seal a dial or digital caliper will be needed to get accurate measurements. Using a tape measure or ruler will not be accurate enough.
I am including links to a FAQ page and a video that will help you when replacing the bearings, races, and seals on your trailer.
If you wish to provide your existing bearing, race and seal part numbers, I can double-check to ensure you are getting the correct bearing kit.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer