Hitch Recommendation for 2011 Jeep Grand Cherokee
Question:
I have a 2011 Jeep Grand Cherokee. I am looking at installing an aftermarket tow hitch with 2inch receiver. Which hitch mounts the closest to the bottom of the rear bumper providing the most ground clearance? Thanks.
asked by: Rus
Expert Reply:
Check out the Curt Hitch part # C13065. This hitch installs right up to the bottom of the rear fascia of your vehicle which will give it the best possible ground clearance. This is also a 2 inch hitch confirmed to fit your 2011 Jeep Grand Cherokee.
When we installed this hitch on a similar 2011 Grand Cherokee as yours we found that there was a distance of 15 inches from the bottom of the hitch opening to the ground.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you would want the part # C56009.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Recommendation that Fits 2018 Jeep Grand Cherokee Altitude
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can The Towing Capacity Of The Vehicle Be Lower Than The Trailer Hitch Receiver
- Q&A: Curt T-Connector Wiring Harness Taillight Connectors On a 2021 Jeep Grand Cherokee
- Q&A: How to Activate Trailer Lights on 2014 Jeep Grand Cherokee Laredo with C55515 Wiring Harness
- Q&A: What is a Concealed Cross Tube Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement for Atwood 6,000 lb Hydraulic Actuating Coupler for Drum Brakes
- Article: My Trailer Hitch Doesn't Fit
- Article: Which Hitches are Made in the USA
- Article: Rooftop Cargo Carriers
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: The 5 Best Trailer Drop Hitches You Can Buy