Installation Of T-Connector Wiring Harness On 2015 Nissan Frontier With Factory tow Package

Question:

Hi, just recently installed this kit on a 2015 Nissan Frontier. Nothing is working. No power going to 4 pin connector. The only continuity I have is the ground. I checked the towing fuse in the Frontiers fusebox and it is okay. I double checked my relay harness installation and the connector is tight and locked in. I do not know what else to do. Help!

asked by: Kelly

Expert Reply:

The installation of the Curt T-Connector Wiring Harness, part # C56225 is pretty straightforward.

I have attached a photo of the harness package and have noted arrows which indicate where they should be installed. The vehicle harness should be located on the passenger side behind the kick panel. You need to plug the harness indicated in the attached photo to that harness.

Then move to the driver side frame rail and locate the harness. Carefully remove the cap and plug the harness included in the kit with the 4-way connector. That should be it for the installation. If the towing fuses check out and you still do not have power the harness may be bad and need to be replaced.

expert reply by: Jeffrey L