Can a Trailer Hitch Installed on a 2010 Chevy Camaro be Used to Tow a SeaDoo
Question:
can this hitch be used to pull a seadoo
asked by: David
Expert Reply:
The Draw-Tite Class I trailer hitch # 24850 for your 2010 Chevy Camaro has a capacity of 2,000 pound gross trailer weight and 200 pounds tongue weight. Provided that the gross trailer and tongue weight of your SeaDoo trailer, loaded and ready to tow, is under those capacities then yes, you can pull the Seadoo with this hitch. Please note the hitch does not fit models with ground effects package.
Check the Camaro owners manual to determine if it lists a capacity for the vehicle and go by whichever is lower, the hitch or the vehicle. The correct ball mount to use is # 3594. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.
For trailer wiring use # HM11141285. I have linked a video showing how the trailer hitch installs.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Trailer for Bass Pro Pond Prowler 10 Foot Fishing Boat
- Article: Performance Chips and Modules
- Q&A: Trailer Wiring Harness Fit For 2015 Chevy Camaro Convertible With Non-LED Lights
- Q&A: Trailer Wiring Harness for a 2014 Chevy Camaro with LED Tail Lights
- Q&A: Trailer Hitch Recommendation for a 2011 Chevy Camaro Convertible
- Q&A: Could ERS120D81 Ramp Door Spring Be Cut Down for Use on a 6 ft Wide Enclosed Trailer
- Q&A: Trailer Hitch Recommendation for a 2013 Chevy Camaro
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Will the Curt Class I Trailer Hitch # C11222 Fit the 2012 Chevrolet Camaro LT or SS
- Article: Trailer Wiring Diagrams