What are the Wires at Each End of Dexter 3500 Pound EZ Lube Axle # T3584F-EZ-8974
Question:
I looked in the Q and A, but found no answer. What are those pinkish/brown wires that hang out at each end of the axle used for? Thank you
asked by: Ryan
0
Expert Reply:
The wiring that you see on axle # T3584F-EZ-8974 is for electric brakes. So you would run the wiring back to one side of the axle, make the splices for the brakes on that side and, instead of running your own wire, it is already run through the axle. So all you will have to do is splice in the brake magnets on the other side. Take a look at the video I have linked. It is mentioned near the end of the video.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Video: Review of TruRyde Trailer Spindles - #84 EZ Lube Spindle - TRU77FR
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What Type of Nut Retainer is Used on the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Shop: Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: Review of Redline Replacement Nut Retainer For 6-191 Jam Nut 6-190 - 6-190
- Video: etrailer Trailer Hub And Drum Assembly Installation
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Q&A: Replacement Trailer Axle Spindle for 3,500 lb Trailer Axle
- Q&A: Does 84 EZ Lube Spindle TRU77FR Come with Castle Nut
- Q&A: Replacement Axle for Jayco RV Trailer
- Search Results: bearing grease
- Article: Trailer Wiring Diagrams
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-EZ-8974 Review
- Video: etrailer Electric Trailer Brake Kit Review and Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: flange nuts
- Search Results: 5 on 5 axle
- Search Results: nut and screw replacement kits
- Search Results: k23~087~00