Installation Instructions for Draw-Tite Class I Trailer Hitch # 24857 on 2011 BMW 328i Sedan
Question:
my car 2011 BMW 328i sedan. I want to buy trailer hitch for my rack. I am concerning how to install and the difficulty of installation. I need to have user manual of the product. Could you show me the picture of installation? Thanks.
asked by: Stephen Y
Expert Reply:
If you'll be using the hitch as an attachment point for a bike rack or other hitch mounted accessory only, the Draw-Tite Class I hitch, part # 24857 would be a good choice.
If you're using the hitch as an attachment point for a bike rack, you'll need to make sure your bike rack is compatible with a Class I hitch, and that you're carrying no more than two bikes. If you're planning on doing some light duty towing, be sure that the weight of the trailer doesn't exceed the towing capacity of the vehicle or the hitch.
I'll include a link to the installation instructions for you. You can look them over and decide if the installation is something you'd feel comfortable attempting yourself. I don't have any photos or video footage of the installation.
If you'll be towing, you'll also need the following to complete your towing system:
• A ball mount, part # 3593
• Trailer wiring harness with 4-pole trailer connector, part # C59496
• 1-7/8 inch trailer ball, part # 19256
• 2 inch trailer ball, part # 19258
• Locking hitch pin, part # e98879
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Wiring Harness for 2011 BMW 328xi
- Q&A: Speed Rating of Load Star 5.30-12 Load Range C Tires
- Q&A: Draw-Tite Sportframe Hitch # 24857 Recommendation for a 2011 BMW 328i Sedan
- Q&A: Best Replacement for Sylvania Microwave SR-11092B In a 2009 Four Winds Thor Class C RV
- Q&A: Are there Hitches Available that will Fit a 2007-2010 BMW 328i Sedan
- Q&A: How to Install the Draw-Tite Trailer Hitch Receiver Part # 24857 on a 2007 BMW 328i or 328xi
- Q&A: Trailer Wiring Harness Recommendation for a 2010 BMW 335d
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose a Bike Rack for a Jeep Wrangler
- Article: How to Choose a Bike Rack That Will Clear a Rear Mounted Spare Tire or Bumper
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Brake Controller Installation: Starting from Scratch
- Article: Stability Control for Heavy Duty Vehicles
- Article: Trailer Wiring Diagrams