Hitch Recommendation for a 2003 Ford F-150
Question:
will the Curt 2inch Trailer Hitch - Bumper Mount - 8-3/4inch Bolt Pattern - 5,000 lbs GTW fit a 2003 ford 150 xlt super cab..i look it has the main and 2 bolt hole one on each side
asked by: Larry
Expert Reply:
I have a solution for you, but the Curt 2" Trailer Hitch # E-3S that you referenced is a universal fit hitch so I don't have specific fit information on it. You can compare the measurements of the hitch that are in the picture I attached to the bumper on your vehicle to see if it will fit.
A better solution would be to go with a custom fit hitch specifically designed to fit the frame of your 2003 Ford F150. The most popular hitch we have that will fit is the Curt Hitch part # C14355. This hitch will fit without any modification and will give you way more hitch capacity then a hitch mounted to the bumper of your truck. I attached an install video for you to check out as well.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included to the right that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt 2" Trailer Hitch - Bumper Mount - 8-3/4" Bolt Pattern - 5,000 lbs GTW
- Bumper Hitch
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Bolt-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can a Jack Hole be Added to an A Frame Coupler
- Q&A: Can a Trailer Hitch be Installed on the Back of a Trailer
- Q&A: Replacement Trailer Tires Size 7.50-16LT Load Range F
- Q&A: How Tall is the Exterior Portion of the Ventline Vanair 12-Volt Trailer Roof Vent # VP-543SP
- Q&A: Trailer Hitch Receiver Options For A Box Trailer Frame
- Q&A: Will Honda Generator Fit In DeeZee Trailer Tongue Toolbox
- Q&A: Recommended Roof Rack for a Interstate 7X16 Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Types of Bumpers
- Article: Which Hitches are Made in the USA
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What To Look For When Buying Ratchet Straps