Troubleshooting Right Stop/Turn Circuit Not Functioning on a 2005 Nissan Titan

Question:

ok have all relays,harness,All is clean. Im getting no power on the right turn/brake.on factory plug its a yellow with black stripe wire that should be the right turn/brake.itor at least thats what mine has. has no power. I ran a jumper from green/yellow right turn signal down to trailer harness an it works fine with truck NOT RUNNING. Start truck goes out. I have run a separate ground from trailer to truck, to ensure good ground. Any idea about this.....thanks

asked by: Steven

Expert Reply:

It is possible that the relays are not in the correct locations for wiring harness # N40975 . Consult the owners manual for all of the locations and make sure they are in the right spots.

Since you said you have all of the correct relays this is the most likely explanation. It is also possible that you have a bad relay. You can try swapping a known working relay from a different circuit into the right stop/turn circuit to see if that causes the circuit to work.

expert reply by: Jameson C