Troubleshooting Outer Tire Wear on a Trailer Tire
Question:
At 5000 kilometers my left side tire trailer tire single Axle showed excessive outter edge wear.What is the toe in spec. for your 3500 lb , axle?
asked by: Milton M
Expert Reply:
You will want to check the inside of the tire and if there is wear also on the inside it will be from low tire pressure. Always make sure to inflate trailer tires to the maximum psi rating listed on the tire for maximum load carrying capacity and longer life.
If the wear is just on the outside then the tire is riding at a slight angle with the bottom pointed more in toward the trailer than the top.
You will need to check the suspension components, axles, spindles, to make sure nothing is loose, bent, or damaged. You will also want to make sure the wheel is not bent. If all of that checks out you will need to take your trailer to an alignment shop to have the alignment fixed.
I have linked an FAQ on trailer tires.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Search Results: 30205 bearing kit
- Search Results: 25mm hub
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Q&A: Difference Between 30205 and L44643 Bearings
- Q&A: Replacement Bearing Option for Trailer Hub with 30205 Bearing
- Q&A: Replacement Hub for a Haul Master Kit Trailer with 30205 Bearings
- Shop: Ladder Rack
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30670 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Search Results: hub
- Search Results: trailer tires and wheels
- Search Results: trailer hub kit
- Search Results: spare tire mount
- Search Results: wheel and tire
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Powerbuilt Triple Lift Jack w/ Locking Safety Bar - 17-1/2" Lift - 4,000 lbs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Q&A: Parts Needed To Build A 3,500LB Trailer Frame For a Homemade Tear Drop Trailer
- Q&A: Replacing Harbor Freight Trailer Axle and Mounting on Underside of Leaf Springs
- Q&A: Replacement Hub Needed for Harbor Freight Trailer
- Q&A: Replacement Axle/Suspension for 4X8 Utility Trailer
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring