Compatibility of MaxxTow # MT70075 Motorcycle Chock with 2001 Harley-Davidson Ultra Classic

Question

Question:

Item #70075 motorcycle chock. I have a 2001 Harley Ultra Classic FLHTCUI. Will this work? I dont want to buy it and then have to return it. Thanks

asked by: Mike C

1

Helpful Expert Reply:

As long as the tire is not any wider than 6 inches, the Erickson # EM07506 Removable Motorcycle Wheel Chock will work great for you.

expert reply by: Mike L

1

click to enlarge

Answer 1

I checked with Erickson and their Removable Motorcycle Wheel Chock item #EM07506 does not have a weight rating. It is made of steel and works with bikes that have up to 6" tires. So long as your Honda and Kawasaki do not have wider tires this…

view full answer...

Answer 2

The Erickson Removable Motorcycle Wheel Chock #EM07506 is one wheel chock, 4-bolts, 4 lock washers, 4 washers, 4 nuts, and 4 backing plates. If you wanted to chock multiple wheels you'll need to purchase multiple sets.

view full answer...

Answer 3

The measurement you're referring to for the Erickson Removable Motorcycle Wheel Chock #EM07506 is 8". This wheel chock has overall measurements of 11-3/4" long x 8-1/4" wide x 8-1/2" tall and will fit tires up to 6"…

view full answer...

Answer 4

With an Enclosed Trailer Ramp Spring #ERS120D81 when the door is lowered it will pull the cables which will turn the pulleys and put tension on the springs. The cables could not be detached with the ramp door lowered because the springs would…

view full answer...

Answer 5

Yes, you can order extra mounting plates for the Erickson Removable Motorcycle Wheel Chock #EM07506. Replacement Mounting Plates #EM56ZV is the part number you are looking for; this kit comes with 4. This allows you to move the chock to different…

view full answer...

Answer 6

B&W makes their Biker Bar motorcycle transport systems, such as #BWMC2301, just for hogs but we do have other setups for cruiser and touring motorcycle transport that are general-purpose products. You can see all of these wheel shock products on…

view full answer...

Answer 7

The Erickson Horizontal E-Track, part #E19148 has 1/4 inch diameter mounting holes spaced 2 inches apart. The screws you use should be at least long enough to go 3/4 inch into the wood you are mounting the track to. The more screws you use the more…

view full answer...

Compatibility of MaxxTow # MT70075 Motorcycle Chock with 2001 Harley-Davidson Ultra Classic

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching