Derale 3/8" Hose Barb to 3/8" Hose Barb Fitting

See what our Experts say about this Derale Accessories and Parts

• Adding an Engine Oil Cooler and a Power Steering Cooler to a 2007 Toyota 4Runner SR5 4.0L V6
  Thanks for asking about a Power Steering Cooler and Engine Oil cooler for your 2007 Toyota 4Runner SR5 V6. Adding two more coolers is not going to present a cooling issue for your engine/radiator. The coolers allow air to flow through them and will not transfer enough heat to the air going through them to effect the cooling performance of the vehicle's radiator. Your engine oil filter has 3/4-16 threads. So you can determine the correct threads to use from the recommended kits below,...
  view full answer...
• Recommendation for Power Steering and Transmission Coolers for a 2000 Honda Odyssey
  You will need to measure the inner diameter of the lines to see if it will accept the 11/32 hose barbs on the cooler. If not, you may be able to use the Derale 3/8 Inch Hose Barb to 3/8 Inch Hose Barb Fitting, # D98028. It all really depends on what the inner diameter of the OEM hose is. I am fairly certain Honda also recommends a transmission cooler for towing as well. The transmission coolers we have listed for your 2000 Honda Odyssey come with and OEM spec hose and Insta-dapt radiator...
  view full answer...
• Acura MDX 2005 Transmission and Power Steering Fluid Cooler Recommendations
  Yes, the Derale Series 8000 Plate-Fin Transmission Cooler Kit, item # D13502, would be a good choice for your 2005 Acura MDX. I linked a drawing showing how the cooler will install and the best location for mounting the cooler on your MDX. You will need to measure the space in the front of your vehicle for mounting the cooler, to determine if this cooler will fit. Dimensions for all of our coolers are on the product pages. We also have a video of a transmission cooler install that should...
  view full answer...
  
• Derale Combination Transmission and Engine Oil Cooler Installation on a 2007 Chevrolet Suburban
  The Combination Engine Oil and Transmission Cooler you purchased, # D15902, will work great on your 2007 Suburban, provided that there is 2 inches of clearance below the OEM oil filter for installation of the sandwich adapter and installation and removal of the filter and there is room for the oil cooler hose to be routed when the sandwich adapter is installed. Lets break the installation down to engine oil cooler and transmission oil cooler separately since the combo you purchased is...
  view full answer...
• Recommended Transmission Cooler for 2008 Toyota Highlander
  For your 2008 Toyota Highlander, I recommend looking at the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13503. This cooler measures 11 inches wide, 8-3/4 inches tall and 7/8 inches deep. As long as this will fit between the grille and AC condenser core, this will be a great option for prolonging the life of your transmission and improving overall performance. This mounting location will provide the most airflow for maximum cooling ability. This system includes barb inlets...
  view full answer...

Do you have a question about this Accessories and Part?