Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (31 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.There was a hole in the box when it got to me. The hitch had some paint flaked from the shipping. The fitment was perfect which is why it is getting 4 stars. I put it on myself in 30 minutes laying on the ground.
Fit perfect. Installation video was spot on.
Low prices! Super Fast Shipping!
Great price, product, and customer service! Easy installation. Two people less than thirty minutes start to finish.
It was less than a 30 minute install. Very easy and looks great.
I installed this hitch on my 2021 Buick Envision. Since this vehicle is a new platform for 2021, there are no videos to watch on how to install it. This would have been helpful because the exhaust hangers present a real problem. If you are installing with the vehicle on the garage floor, you will need to gain about 3" of clearance to be able to get the hitch in the right position. First, you have to position the 4 bolts and brackets into position using the supplied wires. As we tried to get the hitch up into position, it looked like there was no way unless we removed the exhaust hangers. Finally, after much trial and error, I removed 1 T-15 screw from the fascia on the driver side by the exhaust tip and then was able to get the other side of the hitch under the hanger. Then I pulled the fascia back from the side that I removed the screw and was finally able to get the hitch into place. Then I used a small pair of vise grips to hold the bolts in place while I removed the wires. Note, only put the wires on the bolts 2 or 3 turns. I installed the nuts that were towards the front of the vehicle on both sides and then snugged them down to hold the hitch in place. Then put on the nut on the passenger side. The big problem is trying to get the nut on the driver side toward the rear of the vehicle. You are going to need a long 3/8ths extension, a 1/2" extension is too big to fit. Finally, after getting all the nuts on, I used a torque wrench to tighten the nuts down. You definitely need to do a video on the 2021 Envision! This would have been so helpful. As far as the hitch goes, it is very well made and has good quality paint. The shipping and tracking on this hitch were the best I have seen and I hope this review will help! Thank You, Bruce
The hitch we ordered arrived quickly and was perfect for our vehicle. My husband and I installed it quite easily and are very happy with it. We use it for transporting our bikes to and from trails
Came beautifully boxed. No damage whatsoever. The install had to be done by a professional & took 1.8 hours. The charge was $xxx plus tax. I purchased this hitch because I was told the bumper would not have to be removed which was true but the exhaust system had to be completely lowered to install behind the bumper. I would not suggest that anyone try this install on their own.
Each time I change vehicles and have purchased a curt trailer hitch and they have fit perfectly and are easy to install, Arther the salesperson was very knowledgeable and helpful.
Hitch only had one hitch. The exhaust pipe had to be dropped to install it. I had a guy at a body shop do it for $125. I didn't have the convenience of a lift. Considering the dealer wanted $800+ to install one I still made out like a bandit (or less of a fool). I'd buy it again.
Easy to install and workload it should
Don't believe the video showing how easy installation is. Believe the other comments. I had to take my 2021 Avenir to a shop to get it installed. This is not a one person job and there isn't enough room to install this without getting the exhaust pipes out of the way.
The instructions were very helpful as were the four fishing wires provided for the installation.
Great product! Great service!
Exactly as described. Arrived earlier than promised. Instructional videos are great and easy to follow.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.