Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(1 reviews)
Price: $112.11
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C24ZV
Our Price: $112.11
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (1)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C24ZV
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- CURT
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7 amps per circuit
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side tail light. You will have to remove all trunk floor coverings and the rear scuff panel to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56494 CURT T-Connector Vehicle Wiring Harness with 4 Pole Trailer Connector
Installation Details
This Product Fits The Following Vehicles
- 2024 - 2024 Mazda CX-90
- 2024 - 2024 Mazda CX-90
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Defective
Customer Reviews
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - C24ZV
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.by: Robert 05/03/2024
2024 Mazda CX-90
I am completely satisfied with the hitch, wiring and the service that I received. Communication through e-mail was excellent. Thank you. Bob
1
1
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Is There a Hitch for a 2024 Mazda CX-90?Yes, we do have a hitch for the 2024 Mazda CX-90. It is the Curt item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver exposed which not only looks better but helps with ground clearance. The Curt T-Connector Vehicle Wiring...
view full answer... - Does Curt Trailer Wiring for 2024 Mazda CX-90 Put Vehicle into Trailer ModeSince the Curt 4-way kit part # C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.
view full answer... - Is There a Wiring Harness Comparable to Mazda KMV6V7780 For a 2024 CX-90? The Curt T-Connector Vehicle Wiring Harness # C24ZV you found is only going to provide your 2024 Mazda CX-90 with a 4-way flat. We do not have a 7-way option like the Mazda part number KMV6V7780. Instead we have the 7-Way Kit # ETBC7 which will connect to the Curt 4-Way and also provides you with additional wiring and circuit breakers for the charge line and a Brake Controller # RED52VR.
view full answer... - Recommended Hitch for a 2024 Mazda CX-90You're in luck because we do! To add a hitch to your 2024 Mazda CX-90, I recommend the Curt item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2". It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like the Curt item # C25FV because of the way it installs. The entire crosstube will be hidden behind the rear bumper leaving only the 2" receiver visible. This not only looks better but helps...
view full answer... - Installation Video For Curt Trailer Hitch Receiver # C25FV On 2024 Mazda CX-90I have linked an installation video for the Curt Trailer Hitch Receiver # C25FV near the bottom of the page. This is performed on a 2024 Mazda CX-90. I do recommend installing the Curt T-Connector Vehicle Wiring Harness # C24ZV when you install the receiver. This will give you a 4-way flat connector which is most commonly found on small trailers you might tow or Auxiliary Lights # C53201.
view full answer... - Are You Able to Route The 4-Way Wiring Out Of a 2024 Mazda CX-90 Besides Out The Rear Door Hatch? While I cannot see all the access points or grommets on the back of your 2024 Mazda CX-90 you should be able to find one the 4-way # C24ZV would be able to leave the inside of the cab. You may end up needing an Extension # HM48235. If you are having trouble locating an opening be sure to check the tail light wiring above the connector. This would require you to likely have to remove additional components to get the wiring out around the tail lights and down through the rear fascia.
view full answer... - Will The Kick Sensor For Hands Free Lift Gate On a 2024 Mazda CX-90 PHEV Work After Receiver InstallWhile we have not had a 2024 Mazda CX-90 PHEV in our shop with the hands free liftgate to test the exact function I can say most applications will not eliminate the use of the kick sensor. I installed our receiver on my Acura RDX which takes up a lot more of the space under the bumper with its visible cross tube and I can still use the kick sensor on mine to operate the hands free liftgate. You will likely find that you need to perform the kick motion on either side of the receiver tube...
view full answer... - Does the Curt Hitch C25FV for a 2024 Mazda CX-90 Come w/ Fishwire?I checked with Curt and yes, their item # C25FV hitch, does indeed come with the necessary fish wire. It looks like the fish wire was left out by mistake when the hardware was packaged for the new hitch. I have been assured this misstep has been corrected. The reviewers on our site you mentioned were also sent the fishwire tool so be reassured if someone messes up etrailer will take care of you! I have linked an installation video below to help you get this hitch set up. If you are...
view full answer... - Difference in 2024 Mazda CX-90 Curt Trailer Wiring HarnessesThe Curt # C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is on our site listed as part # C24ZV, is one of their T-Connector wiring kits which tees into a pre-existing connector on your vehicle and then the only wiring you'll have to do is run a hot wire lead to your battery so that the trailer lights will...
view full answer... - Troubleshooting Curt 4-Way Not Working Correctly on a 2024 Mazda CX-90Since U-Haul installed the Curt T-Connector Vehicle Wiring Harness # C24ZV on your 2024 Mazda CX-90 you are probably going to want to have them check it for you. If they are not willing to help you then you are going to want to use a Test Light # PTW2993 to check both the wiring going into and out of the powered module. If the signal coming out of the module is different than the signals going into it then you know the unit is bad and you will want to contact Curt to begin the warranty...
view full answer... - Trailer Wiring Harness For 2024 Mazda CX-90We do have a 4-way trailer wiring harness that fits your 2024 Mazda CX-90, and I verified directly with the manufacturer for you the correct part number is the following: - Curt T-Connector Vehicle Wiring Harness # C24ZV This will pair superbly with the the hitch that fits your '24 CX-90, the Curt Trailer Hitch # C25FV.
view full answer... - Recommended Trailer Wiring Harness For A 2024 Mazda CX-5Hi Richard, For a 2024 Mazda CX-5 you'll need the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496. This wiring kit will splice into your tail light wiring and require you to run a power wire to the battery to prevent pulling power from the tail lights and dimming them.
view full answer... - Correct 4-Way Wiring Harness for 2024 Mazda CX-90 PHEVWhat you're looking for is the Curt # C24ZV. This wiring harness plugs into the OEM vehicle socket in the rear cargo area. Once installed, you will have a 4-way to power your trailer's signal lights. In addition to the hitch # C25FV and wiring you will also need a ball mount if you're planning on towing. Check out the Curt Towing Starter Kit # C45534. The kit comes with a 2" ball, locking hitch pin, hitch cover, and a storage case.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Written by:
Lindsey S
Written by:
Sabrina W
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Chris R
Video by:
Jonathan Y
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.