THIS ITEM IS NOT A FIT FOR
2000 Toyota 4Runner
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Kia Borrego
Item # 3032-P
Retail:$29.00
Our Price: $14.95
You Save: 48%
2000 Toyota 4Runner
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3032-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tow Ready Brake Controller Adapter
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package.
This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
3032-P Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Kia Borrego
Replaces 22291
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2011 Kia Borrego with factory Tow Package
California residents: click here
0
0
See what our Experts say about this Tekonsha Accessories and Parts
- Recommended Plug In Brake Controller Adapter for a 2021 Kia Telluride w/ the Factory Tow PackageThe plug in adapter Item # 3032-P you referenced is not but I have one that is. The correct adapter to connect the Prodigy P3 Brake Controller item # 90195 to your 2021 Kia Telluride is the Tekonsha item # TK78VR. The connector you're looking for in your Kia is located behind the driver's side kick panel, just to the left of where the driver's left foot would be when driving.
view full answer... - Are There Fuses Under Hood of 2009 Kia Borrego Needed to be Installed for Brake ControllerYes you do need to install some fuses under the hood of your 2009 Kia Borrego to install the Prodigy P3 part # 90195 with the part # 3032-P. Check the owners manual for brake controller power circuit fuses and insert them into the slots that are missing them.
view full answer... - Where is Brake Controller Install Harness for 2009 Kia Borrego with Tow PackageOn your 2009 Kia Borrego the brake controller install port is behind the emergency brake pedal tucked behind the kick panel like you can see in the attached install instructions for the # 3032-P which is the correct harness for a Tekonsha controller like the P3 part # 90195 and your vehicle. It can be hard to find but it is there. Sometimes you have to dig around to find it as it can settle back behind other harnesses over time.
view full answer... - Plug and Play Installation of a P-3 # 90195 Brake Controller on a 2009 Kia BorregoIf your 2009 Kia Borrego has the factory tow package with a 7-Way trailer connector at the rear of the vehicle, it will be a simple plug and play installation. You will only need the P-3, item # 90195, brake controller and the Brake Controller Wiring Adapter for Kia Borrego, item # 3032-P to install the brake controller on your vehicle. If your Borrego does not have the factory towing package you will need to use the Curt Custom Fit Vehicle Wiring for the 2009 Kia Borrego, item # 56104,...
view full answer... - Location of Brake Controller Connector on 2009 Kia BorregoThe connector for installing a brake controller like the Prodigy P3 # 90195 that you referenced, in your Kia Borrego is located above and behind the emergency brake pedal. Look for a white 4-pin connector to install the # 3032-P. I will provide a link to the instructions for you. The instructions show where the connector is located in relation to the emergency brake pedal. If your Borrego was not equipped with the OEM tow package including the factory 7-way connector, there will be some...
view full answer... - Trailer Brake Controller Plug In Location For Factory Tow Package On a 2009 Kia BorregoThe plugin for the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 and the Adapter # 3032-P on your 2009 Kia Borrego is located by the emergency brake pedal. You must have the factory tow package to have this connector. It is possible that the connector may be lower on your vehicle than the one in the image below so you may need to feel around for the connector or remove the kick panel to find the connector.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.