Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 part number: Y00429
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Clear anodized alloy finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 part number: Y06135
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 4 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006135 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06135
Average Customer Rating: 4.8 out of 5 stars (1475 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.1608442
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation1757391
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!1644209
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.870712
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.1250442
by: Roland01/08/2024
Well packaged and on time 1708575
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.1550963
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos. 830253
by: Sara03/19/2019
2017 Honda Pilot
Yakima is always great, the bars are just right for my kayaks and look great too. 612864
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.1515794
by: Moparnut22808/20/2023
Great product fast shipping 1651167
by: Andrew08/01/2023
2012 Honda Civic
Great! Easy to install! 1639087
by: Orlando12/05/2022
Hi, the company, good profesinal service. The product, all I pay was there. Very easy to install. Thanks Bless1478927
by: John05/07/2020
etrailer did an amazing job of having their collective together with regards to my latest order for a roof top rack. First of all, when you go to one these manufacturer websites, either thule, or Yakima, you realize just how complicated this task can be. etrailer does all of that for you. Package arrived earlier than expected and everything was correct the first time. I installed the product myself in under an hour. Done, Done, and Done.
thanks etrailer794457
by: Chuck S07/19/2016
Dodge Ram Pickup
I have ordered several Yakima rack parts and a front hitch for my '13 Ram truck. The sales staff was very helpful in getting me the correct parts and with timely shipping. The items arrived as predicted and are correct. They fit as they should and install was straight forward. I recommend these products and the service was excellent.273681
by: Rebecca 12/31/2022
Great fit, feels really sturdy, excellent directions1491877
by: Michael06/07/2022
They really didn't stay in place, and I ended up riveting them to the car so they would stay on the car.1309915
Sierra K.
6/10/2022
This should be a snug fit. Be sure that the included tool clicks when torqueing down so that you know it is tight. See more tips in this attached install video:
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.634356
by: Chuck S07/19/2016
Dodge Ram Pickup
I have ordered several Yakima rack parts and a front hitch for my '13 Ram truck. The sales staff was very helpful in getting me the correct parts and with timely shipping. The items arrived as predicted and are correct. They fit as they should and install was straight forward. I recommend these products and the service was excellent.273680
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum view full answer...
The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers:
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- TimberLine Towers for Yakima Crossbars # Y33TR
I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise.
It is also highly view full answer...
The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components:
Crossbars # Y00429
Feet # Y28TR
Fit Kits # Y06125 and # Y06165
I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft.
Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise view full answer...
To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV
I have attached a couple of pictures below that will show you what this roof rack looks like and view full answer...
Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails.
Bare Roof
- Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426
- BaseLine Towers # Y28TR
- BaseClip Fit Kit view full answer...
Yes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install. view full answer...
Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429
- SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
- Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229
- (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202
With view full answer...
For a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle.
I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16" view full answer...
Great news! Yakima has systems to choose from for your 2016 Ford Edge Sport with Vista Roof.
The mounting hardware will all be the same but you have a choice between crossbar styles Round, Steel Corebar, and black or silver Jetstream aluminum bars.
For this system you will need the BaseLine Towers # Y28TR, the BaseClips # Y06102 and # Y06139, then your choice of crossbars:
# Y00425 Black JetStream Aluminum
# Y00421 Steel CoreBar
# Y00408 Round Bar will need adapter # Y03536
I view full answer...
On your 2013 Nissan Rogue, there are only two Yakima towers confirmed to fit. The baseline towers # Y28TR are for the models without existing rails or crossbars. They will require the BaseClip Fit Kit # Y06123 and # Y06135. These towers will work with a variety of rails. The other towers are for the raised factory rails and don't require any clips, so you must have the baseline towers. The # Y06135 are for the rear crossbar towers and the # Y06123 is for the front crossbar towers. view full answer...
If this were my 2020 Toyota Highlander the roof rack I would put on it would be Yakima because it will give you a larger amount of crossbar space than most racks so you can hold the most gear, it is extremely quiet, highly durable and looks fantastic. The rack that fits your 2020 Toyota Highlander with a naked roof is made up of the following parts:
- Yakima JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06153 and # Y06132
- Same view full answer...
Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime.
Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR.
You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars. view full answer...
Yakima phased out the Q-Tower style roof racks so while we can help you reuse the round crossbars you have we don't have a fit kit for the towers you have now to fit your 2012 Toyota Prius. Instead the part numbers you need are # Y28TR, # Y03536, and # Y06117 to use with your round bars # Y00409. view full answer...
Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet.
If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof view full answer...
I can help you get a roof rack system and bike rack for your 2015 Mazda CX-5.
The Yakima rack that I would recommend for you is made up of the following parts:
# Y00422 - 60 inch Corebar Crossbars
# Y28TR - BaseLine Towers
# Y06130 - BaseClip fit kit
# Y06132 - BaseClip fit kit
Since your roof is a naked style you will need the use of the fit kit clamps featured in the above listed setup.
One of the reasons Yakima may have been unclear about if the Qtower would work or not is view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
If your 2019 Hyundai Santa Fe features a completely naked roof without flush mounted rails that run front to back then I recommend the Yakima JetStream Roof Rack because of its extremely aerodynamic design that allows for both a quiet ride and a really sleek appearance on your brand new vehicle.
I also really like the Yakima systems in particular because of their fitting process which consists of them actually installing and testing their roof racks on the vehicle before confirming view full answer...
We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y28TR for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit.
This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
I have a great roof rack for you. Unfortunately, I confirmed with Thule that they do not have a roof rack system engineered to fit your 2021 Toyota Highlander XLT whether you have a bare roof or flush factory rails. However, we do have a similar Yakima system available.
If you have a bare roof Highlander, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Black - 60" # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit view full answer...
It looks like the 2007 Buick LaCrosse uses the Yakima BaseLine Towers.
For every Yakima crossbar set that is compatible with this LaCrosse, the towers are part # Y28TR, and the fit kit is the BaseClip Fit Kit, part # Y06170.
These are the only parts you need for the JetStream Crossbars and the CoreBar Crossbars. If you have the Round Crossbars, you will also need the RoundBar SL Adapter, part # Y03536. If you have the HD Crossbars, you will also need the HD Bar SL Adapter, part # view full answer...
The Yakima BaseLine towers part # Y28TR are a fit for your 2019 Kia Sorento but to install them to the roof of your vehicle requires the fit clip kits part numbers # Y06159 and # Y06170 which are what specifically were custom made to fit the roof of your vehicle. Then for a set of Jetstream crossbars you'd want the part # Y00425 and you'd be set. view full answer...
Due to the roof design of your 2018 Jeep Grand Cherokee the only roof rack solutions we have require clips that mount to the door frame. You'll have to use the Baseline feet part # Y00146, the BaseClip fit kit part # Y06121 (quantity of 2), and then the roundbar adapter part # Y03536 to reuse your crossbars like the # Y00408. view full answer...
Yes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409. view full answer...
Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410. view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
If you are just needing the Yakima BaseClip Fit Kit for your 2014 Dodge Ram 1500, you can use part # Y06135.
If your 1500 is the Quad Cab, the rest of the roof rack assembly will include # Y00422 for the two 60 inch crossbars and # Y28TR for the BaseLine Towers. I have attached an installation video for you to check out.
view full answer...
Sometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of:
BaseLine Towers for Yakima Crossbars # Y00146
BaseClip Fit Kit # Y06135
BaseClip Fit Kit # Y06179
Round Bar Adapter # Y03536
view full answer...
Yes! I confirmed with Yakima that the # Y00426, # Y28TR, and 2 sets of the # Y06135 fit your new body style 2019 Ram 1500 Crew Cab. To add theft-deterrence to your roof rack, I recommend using the Same-Key Locks # Y07204. view full answer...
The fit kit part # Y06135 only includes two clamps which means it's enough to install one crossbar. To install two crossbars you'd need to order a quantity of two. view full answer...
For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124.
The clips won't scratch the paint either. view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
6/10/2022
This should be a snug fit. Be sure that the included tool clicks when torqueing down so that you know it is tight. See more tips in this attached install video:
Helpful Links
tv-install-yakima-roof-rack-2014-toyota-prius-c-y00408-y00146-y03536-y06135-y06179.aspx