Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 part number: Y00426
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit to create a complete roof rack
Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
Aero-style bars reduce drag to help maintain fuel efficiency
Full-length design maximizes space for carriers and accessories
Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
Works with most universal-mount bike, water, snow, and cargo carriers
Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
Simply push down on the SmartFill strips to slide in accessories - no trimming required
Bottom channels allow for easy installation on Yakima towers
Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
Etched measurements on bottoms of bars help center rack on your roof
Lightweight aluminum bars are durable and rustproof
Internal JetTruss extrusions provide exceptional bar strength
Black powder coat finish is corrosion resistant
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
T-slot dimensions: 7/8" wide x 7/16" tall
T-slot top opening: 7/16"
Underbar slot: Full length
Limited lifetime warranty
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
Item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06148
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006148 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06161
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006161 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06148
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06161
Average Customer Rating: 4.8 out of 5 stars (2296 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Frank02/10/2023
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.1515956
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!549914
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!1218031
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak. 427427
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install. 803293
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!1697363
by: Cuong04/22/2024
Five-star seller. High quality products, fast shipping. Thank you for a pleasant buying experience.1771639
by: DogDoc04/12/2024
2024 Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.1765846
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.1139343
by: Ernesto07/23/2022
Well you asked for it so; I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack1335868
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down. 589149
by: Daryl04/29/2020
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.789770
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.1238568
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.462341
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.1678878
by: Ryan09/07/2022
Quiet crossbars that look good and do not howl at highway speeds.1397047
For your 2021 Jeep Grand Cherokee, I recommend checking out the:
-Yakima JetStream Crossbars # Y00426, with the BaseLine Towers for Yakima Crossbars # Y28TR, and two sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06121.
These crossbars have a maximum weight capacity of 165-lbs, measure 60" long x 3-1/8" wide x 1" tall, and have built-in WindRidges that help control air flow over bars to dramatically reduce wind noise and vibration. view full answer...
The best Yakima Roof Rack for your 2016 GMC Yukon consists of:
60 inch JetStream Crossbars # Y00426 (black)
SkyLine Towers # Y53TR
Landing Pad # Y00243
This is Yakima's quietest, most aerodynamic roof rack. It uses built-in WindRidges to contorl air flow over the bars to reduce wind noise and vibration. The bars are strong, durable, and will support up to 165 pounds. I've attached a video review for you to take a look at. view full answer...
I recommend the Yakima JetStream Crossbars part # Y00426 with the BaseLine Towers for Yakima Crossbars part # Y28TR, fit kit part # Y06153 and part # Y06132 for the 2020 Toyota Highlander. The Yakima JetStream are aerodynamic bars to cut down on wind noise and have a t-track to mount accessories like a SUP board carrier.
I recommend the Lockrack Stand-Up Paddle Board Carrier part # LR54FR which has racheting arms so you don't need to worry about tie downs. The Lockrack mounts in the view full answer...
For fitting a cargo box and a bike rack on the roof of you 2016 BMW X3 I would recommend going with a 60 inch long crossbar roof rack to give you as much room as possible. For that the Yakima JetStream roof rack part numbers # Y00426, # Y00145, and # Y06008 would be what I recommend as this setup is a confirmed fit for your 2016 BMW X3 and comes with 60 inch bars which would work well. view full answer...
I recommend going with the Yakima JetStream roof rack system for your 2019 Ford Expedition because the JetStream bars are more versatile than other crossbars and they don't require any modification to the rubber strip when using accessories.
The parts that you need to install this system on your 2019 Expedition are the 60" JetStream Bars # Y00426 , and the TimberLine Towers # Y33TR. These easily install on the OEM raised rails of your Expedition and can be locked for security with the view full answer...
We have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of:
- JetStream Crossbars # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105
The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes view full answer...
We actually have a list of roof racks that are compatible with your 2018 Jeep Grand Cherokee that has the black plastic trim. I have linked the fitguide for you to reference.
Out of the compatible roof racks I highly recommend the Yakima JetStream roof rack which consists of the Black Crossbars # Y00426, the BaseLine Towers # Y28TR, and the BaseClip Fit Kit # Y06121. This gives you a sleek looking roof rack with a 125 lb weight capacity and the ability to use clamp or T-Slot accessories. view full answer...
The Yakima Baseline/JetStream roof rack system that is a confirmed fit on your 2013 Hyundai Santa Fe Sport with a bare roof consists of parts # Y00426, # Y28TR, # Y06130 and # Y06150. This is a great rack that provides you with an aerodynamic system which will also not interfere with your sunroof.
You can refer to the linked installation for illustration of how this rack installs. If you let me know what you plan on using the rack for I'd be more than happy to make another recommendation view full answer...
Thule offers just what you're looking for with their AeroBlade Edge rack, part # TH7504-TH7504 for silver or # TH7504B-TH7504B for black. The AeroBlade Edge will provide more of the OEM rack look that you're looking for, and won't extend past the roof side rails. I've linked to a product demonstration video that shows the Aeroblade Edge being installed. view full answer...
The reason the the 60" Yakima JetStream Crossbars # Y00426 are showing as not confirmed to fit your 2017 Honda CR-V is due to the fact that it will be wider than the roof of your vehicle. As long as the 60" bars are narrower than the widest point of your CR-V which is usually the mirrors, you will be able to use the # Y00426. If the crossbars are too wide it can cause a safety issue and could even be illegal in some areas, and you would want to stick with the 50" # Y00425.
To do this view full answer...
For your 2022 Toyota Highlander with no existing rails I recommend the Yakima JetStream Roof Rack System. For this rack you will need the # Y00426, # Y28TR, # Y06153, and # Y06132. This rack uses the JetStream crossbars which are extremely quiet and low-profile. The feature a lightweight aluminum construction and accommodate most accessories that use T-slots or clamp around bars.
If you would like to keep your rack secure, I would also recommend adding the Yakima Same Key System (SKS) view full answer...
Thank you for the photo of your roof on the Altitude you have. That helps a lot when trying to find the right items for your Jeep.
Since there are no mounting points on your Jeep roof or on the all black rails you have, the roof rack I recommend is the Yakima JetStream roof rack. This roof rack uses clips to attach to the inside of the door jamb. To order this roof rack you will need part # Y00426, part # Y28TR, and part # Y06121.
view full answer...
I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because with the WingBar Evo crossbars, they come with bottom channels that do not extend the entire length of the bottom of the crossbar. With that being the case, there is no way to fully determine what WingBar Evo crossbars you need unless we have the view full answer...
We actually do have a selection of roof racks that fit your 2016 Ford Edge with the panoramic roof. I have attached a link to our selection for you to filter through, but I'm pretty sure you have the naked roof (no flush mounted rails) so I recommend using the Yakima JetStream roof rack which consists of the following:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
Fit Kit - # Y06102
Fit Kit - # Y06139
Yakima actually has pictures showing this installed and view full answer...
To install your existing Yakima JetStream Crossbars like the 60" # Y00426 (which is the length recommended for your truck) on your 2012 Ford F-150 SuperCrew you will need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06168. It looks like the Towers and Fit Kit that you mentioned are for later model year Ford trucks.
I have attached a short video review on this setup below that you can check out as well. view full answer...
In order to carry kayaks on the roof of your 2014 Honda CR-V you will first need a roof rack if you do not already have one. The best option we have for this is the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y28TR, part # Y06148, and part # Y06152. This system has aero shaped crossbars which will work to reduce both wind noise/drag and they have integrated channels which will accept most channel mounted accessories.
You should have no problems using view full answer...
For your 2019 Honda Odyssey with raised rails that run front to back the Yakima JetStream roof rack part # Y00426 and # Y33TR is the rack I recommend.
This rack easily installs on the raised rails of your Odyssey and gives you a rack with aerodynamic shaped bars that will give you a quiet ride. view full answer...
According to Yakima, the shortest crossbars that will work on your Ridgeline is their 'medium' crossbar which is the 60 inch long # Y00426. If you go any shorter than that, the bar won't be long enough to properly connect to the roof rack feet.
To provide a rack, if you have the bare roof you'd need the following:
60 Inch Crossbars, part # Y00426
BaseLine Towers, part # Y28TR
Vehicle Specific BaseClips, part # Y06152
If your Ridgeline has the side rails on the roof, you'd use view full answer...
I checked with Yakima and they have their Jetstream roof rack part numbers # Y00426 and # Y33TR as a confirmed fit for your 2020 Ford Explorer with raised rails and the moonroof. They recommend carefully watching the setup so that the bars don't interfere with the sunroof as you open it but the bars can be positioned so that it would work fine.
Then for an easy to use cargo box that fits this rack and also has best clearance for opening the rear hatch you'd want the Thule Motion XT part view full answer...
Yakima does not utilize the Q Clips and Towers for the 2016 Toyota Prius Prime.
Instead, they utilize the BaseClips, part # Y06169 and # Y06123, for the BaseLine Towers, part # Y28TR.
You can see a combination of these parts with some JetStream Crossbars, part # Y00425, at the link below. If you already have Yakima crossbars, then the is no worry as the BaseLine Towers are designed to work with Yakima's entire range of crossbars. view full answer...
If your 2019 Hyundai Santa Fe features a completely naked roof without flush mounted rails that run front to back then I recommend the Yakima JetStream Roof Rack because of its extremely aerodynamic design that allows for both a quiet ride and a really sleek appearance on your brand new vehicle.
I also really like the Yakima systems in particular because of their fitting process which consists of them actually installing and testing their roof racks on the vehicle before confirming view full answer...
We have parts to fit your Yakima round bars on your 2015 Nissan Altima, but not with the Q Towers as they were discontinued. According to Yakima you'll need the bars that you have already like part # Y00408.
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit # Y06137
BaseClip Fit Kit # Y06127
view full answer...
We don't offer any aftermarket side rails for your 2016 Honda Pilot, but you can still install a roof rack.
Since your Pilot doesn't have the roof rails, you'll need a Yakima roof rack system for a bare roof that clamps to the inside top of the door jambs. This is a very effective mounting system that will work perfectly for your Pilot.
The most cost-effective rack uses round crossbars, you'd use the following parts:
Yakima Round 58 inch crossbars, part # Y00409
Yakima BaseLine view full answer...
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071.
If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130.
For flush mount rails you would instead need the 50" JetStream Bars # Y00425, view full answer...
The best option for a roof rack on the 2019 Toyota Prius is the Yakima JetStream Crossbars part # Y00425 with the fit kit part # Y06123, part # Y06169 and BaseLine Towers for Yakima Crossbars part # Y28TR. The BaseLine towers are the best option as far as fit goes on the Prius because you can adjust the pitch of the tower to get the roof rack level even on the curved roof of the Prius which is an issue that many Prius owner's have run into in the past. The Yakima bars are also aerodynamic view full answer...
On your 2013 Nissan Rogue, there are only two Yakima towers confirmed to fit. The baseline towers # Y28TR are for the models without existing rails or crossbars. They will require the BaseClip Fit Kit # Y06123 and # Y06135. These towers will work with a variety of rails. The other towers are for the raised factory rails and don't require any clips, so you must have the baseline towers. The # Y06135 are for the rear crossbar towers and the # Y06123 is for the front crossbar towers. view full answer...
Yakima recently discontinued their Q-Tower roof racks which means their Q clips are gone as well. You would need the Q7 clips part number 8000607 but they are not available anymore. We do have a solution that would allow you to still use the round bars you have though. For that you'd want the part numbers # Y28TR, # Y03536, and # Y06122 since you already have the round bars like part # Y00410. view full answer...
We do! The lock kit you need for the Yakima BaseLine Towers # Y28TR can be found on our site as part # Y07204. This kit comes with 4 matching lock cores, 2 keys, and the change key needed to remove and install the cores. view full answer...
There is definitely a roof rack from that will fit securely on your 2020 Hyundai Venue with a naked roof; the rack is made from Yakima which means it is really high-quality, and uses aero-shaped bars to ensure you have a quiet ride. The roof rack for your Venue consists of:
- Yakima JetStream Crossbars # Y00425
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170 and # Y06187
- Same Key System Lock Cores (Optional) # Y07204
The view full answer...
Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8". view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
While we have a way for you to use Yakima round crossbars on a 2019 Ram 3500, it will need to be as a roof rack application, and the reason for that is the BAK Vortrak Hard Tonneau Cover slightly covers the stake pockets of your '19 Ram 3500 and there is no way to add a rack system over the tonneau without interference.
There is also not a way to attach those crossbars to the bed of your truck, but what you can do instead, so long as your 2019 Ram 3500 is a Crew Cab or Mega Cab is use view full answer...
Since the rack he has is for raised rails and the crossbars are only 38" in length you wouldn't be able to use any of the components and would need a completely new rack. A 2002 Toyota 4Runner has a minimum bar length of 48" so for a round bar setup on a naked roof you would need the following components:
Yakima RoundBar Crossbars # Y00408
BaseLine Towers for Yakima Crossbars # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171
If view full answer...
The Yakima Baseline towers # Y28TR with the landing pad 19 will leave you about 5-1/4 inches from the top of your bar to the roof of your 2020 Honda CR-V. That being said the Yakima Showdown # Y04081 will sit about 9 inches up from the top of your bar when the kayaks are not loaded. view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit view full answer...
Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet.
If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima view full answer...
While we do have a roof rack that fits your 2019 Hyundai Santa Fe, unfortunately Thule only has a fit if your Santa Fe has the rails so instead I recommend using the Yakima JetStream setup which is the same quality as the WingBar Evo crossbars from Thule. Here are the parts you'll need:
- Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06151
- (Optional view full answer...
The BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, # Y28TR, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, # Y06102, and the Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, # Y00425, make up the roof rack system I recommend for your 2017 Ford Edge with no existing rails or crossbars.
According to the Ford owners manual for this vehicle, this rack is limited to the factory specs for load capacity of 45 kg or 99.2 lbs.
I've attached view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
If you installed a heavier duty roof rack on your 2005 Toyota Corolla like the Yakima HD roof rack part numbers # Y01156, # Y00146, # Y03541, # Y06136, # Y06148 you could use a roof top tent like you mentioned. view full answer...
I do have a roof rack solution for you, but the Yakima Q Towers # Y00135 that you referenced are not confirmed to fit your 2017 Acura RDX.
Although a roof rack isn't necessarily required to carry a roof cargo bag (if that is what you mean by "soft luggage carrier") some people like to have a roof rack anyway for more attachment points and to have the ability to use other accessories.
If your Acura does not have existing rails or crossbars and you would like to use the round crossbars view full answer...
I have a great roof rack solution for your 2017 Acura RDX with a bare roof. Unfortunately, I spoke to my tech at Thule, and the former fit kit that was available for your vehicle (Thule part KIT1724) is discontinued. For this reason, there are no available Thule roof racks that are compatible with your bare roof.
With that being said, Yakima has a similar high-quality roof rack that compares to a Thule system. For that setup, I recommend the following parts:
- Yakima JetStream Crossbars view full answer...
Yes! If you have a bare-roof 2013 Honda Accord Sedan Sport, you need the following setup to mount road bikes:
- Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06148
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06150
With this Yakima JetStream setup, you received the benefits of an extremely aerodynamic system that view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.